Original Piaggio brake pads for the front brake of numerous Vespa, Piaggio, Gilera, Derbi and Aprilia models. The brake pad set is designed for vehicles equipped with a HengTong type S51 brake caliper with Ø=12 mm guide pin and corresponds to Piaggio part numbers 497116, 647078, 651253 and 668021.
The brake pads serve as an original replacement for worn or damaged standard pads. In addition to the vehicle application, the version of the fitted brake caliper must be taken into account, as different braking systems may have been used within individual model ranges.
This brake pad set is specifically assigned to the HengTong type S51 brake caliper with a Ø=12 mm guide pin. The two pads have different backing plate shapes and are designed according to their respective positions within the brake caliper.
The constructional details are clearly visible in the product images. The metal backing plates feature the required locating and guiding sections. One of the two pads has an extended side section with an open locating point, while the second pad features separate mounting or guide tabs. Both friction surfaces have a centrally positioned groove.
As an original Piaggio spare part, this brake pad set corresponds to the standard specification intended for this braking system. It is therefore suitable for maintenance and repair work where the original brake system configuration is to be retained.
Piaggio reference numbers 497116, 647078, 651253 and 668021 are assigned to this brake pad set. When identifying existing pads, the shape of the backing plates as well as the HengTong S51 brake caliper version with 12 mm guide pin can be used for comparison in addition to the part number.
Depending on the model year and version, different brake calipers and brake pads may have been fitted within individual vehicle ranges. Before ordering, check whether the vehicle is equipped with a HengTong type S51 brake caliper with Ø=12 mm guide pin. It is also advisable to compare the part number, dimensions and shape with the brake pads currently fitted.
Brake pads are safety-relevant wear components. When replacing them, the brake disc, brake caliper and other components of the braking system should also be checked for condition and correct operation. Installation and the subsequent functional check must be carried out professionally.