Complete carburetor kit for conversion to the Dellorto PHBL 25 carburetor.
Perfect replacement for all old MA or SH or for all tuning applications up to 250ccm. The original air filter box can be kept. To get the maximum performance you can use a so called remote filter system. The original intake hose is kept and supplemented by a Ramair filter.
The carburettor can be tuned much better. The engine runs over the entire speed range as if there was suddenly softener in the tank.
Thanks to the 180° throttle cable guide included in the delivery, the original throttle cable fits. You only have to change the inner cable.
All necessary tuning parts are included in the delivery.
We will gladly give you tips for a starting nozzle for your individual engine. Just send a mail to: lambretta[at]scooter-center.com.
This
carburettor kit for the Lambretta engines with the big engine housing of the 200ccm+ class is ideal for all Lambretta drivers who want or have to change from the simple SH carburettor to the modern PHBL Dellorto. The throttle cable should be laid in large radii without kinks for a fluid function.
With the practical nozzle sets and the needle set, engines from the original SX200 to extremely open racing cylinders can be easily and uncomplicatedly vented.
scope of delivery:
-carburettor Dellorto 25mm PHBL BS AW=30mm
intake manifold MB DEVELOPMENTS Lambretta 200ccm+
-carburettor guide set Dellorto
-cable choke-Kit Dellorto PHBL
-internal puller universal
-connecting rubber MB DEVELOPMENTS
-hose clamp AW 32-50mm
-carburettor needle set bgm PRO Dellorto PHBL (D22, D24, D26, D27, D28, D29, D30, D31, D32, D33)
-main nozzle set bgm PRO Dellorto 6mm (50-72) for LP range
-main nozzle set bgm PRO Dellorto 5mm (75-98) for HD range
-Main nozzle set bgm PRO Dellorto 5mm (100-122) for HD range
-aspiration port seal Lambretta
-gas cable clamping nipple
AI-translation