DellOrto carburettors are a constant in the scooter sector. They are very popular with Aprilia, Piaggio and Gilera who use them in their engines ex works. They are characterized by easy assembly and good tuning. If this carburettor is to be used on 50-80cc engines a larger intake manifold must be installed. For Piaggio/Gilera engines you can use the manifold of the 125/180cc models, the outer diameter of the carburettor is 28mm at the manifold side and 41mm at the air filter side. Suitable here are the electric choke of the smaller 10-12-14-17,5mm carburettor types from Dell'Orto, but alternatively a manually operated choke can be used for short distance operation to save fuel. The conversion kit required for this purpose is available separately under article number 2599093.connections for fuel, oil and vacuum are available.Attention: Like all newer Dell'Orto carburettors, the one offered here also has a specially shaped propeller. This can be provided for the simpler adjustment with a slot at the head.


AI-translation

Rate this article now and let us know what you think.
Carburetor
Main nozzle size
82
Main nozzle type
Dellorto 6mm (6413)
Secondary nozzle type
Dellorto (15500)
Needle type
Dellorto M (15377)
Slider type
Rundschieber
Choke type
elektrisch
Connection type Intake manifold
Gummiverbindung
Position of mixture screw
rechts
Fuel hose position
rechts
Fitting type
M6 x 0.75
Float chamber material
Kunststoff
Size of secondary nozzle
50
Needle size
M6
Mixing tube size
MR210
has Powerjet
nein
Slider size
40
Height
132 mm
Width
66 mm
Depth
75 mm
Relative connection height
83 mm
Connection width air filter
41.5 mm
Connection width of intake manifold
29 mm
Fuel hose connection width
5.5 mm
has oil connection
ja
has vacuum connection
ja
Venturi size
20.5 mm
Connection type Air filter
geklemmt
Position of idle throttle screw
rechts
 
OEM numbers (for comparison purposes only)
Dellorto:
01165
Matching
Customers also bought