CDI -PIAGGIO- Vespa ET4 (ZAPM0400 - for vehicles without immobiliser / convert to non immobiliser), Piaggio Sfera 125 RST (ZAPM01000), Liberty 125 (ZAPM011000), Hexagon 125 4-stroke (ZAPM15000), Aprilia Mojito Retro 125 (ZD4PM - Piaggio engine)

Original PIAGGIO spare part in the usual good and high-quality OEM quality!
The Vespa ET4 models of the first generation have a so-called immobilizer. The original ignition key has a chip which only releases the ignition when the code is correct. A counterfeit key will therefore not let the vehicle start.

This CDI is suitable for bypassing the original immobilizer. Simply install this CDI without immobilizer and lay a separate cable from the CDI to the ignition coil (approx. 30cm 1.5mm² cable with two flat plugs). Insulate the remaining multi-connector waterproof and fix it with a cable tie.

NOTE: Please follow the instructions under Downloads!

NOTE:/b>: Piaggio purchases its goods from different manufacturers in Europe and Asia. The picture material may therefore differ from the delivered goods.

_{AI-translation}