Crankcase/maghouse gasket -MB DEVELOPMENTS Graftec- Lambretta LI, LIS, SX, TV (series 2-3), DL/GP -

Bearing grease -HANSELINE- 50g

Liquid gasket -ELRING Dirko HT red- 70ml

Ball bearing -6305 2RS (both sides sealed)- (25x62x17mm) - (used for crankshaft, drive side Lambretta LI, LIS, SX, TV (series 2-3), DL, GP)

Ball bearing -6305 1RS (single side sealed)- (25x62x17mm) - (used for crankshaft, drive side Lambretta LI, LIS, SX, TV (series 2-3), DL, GP)

Gasket remover -BGM ORIGINAL- 23mm

Shim -DIN 988- 50x62x0.1 (used for ball bearing 6305, 613912)

Shim -DIN 988- 50x62x0.2 (used for ball bearing 6305, 613912)

Shim -DIN 988- 50x62x0.3 (used for ball bearing 6305, 613912)

Shim set -DIN 988- 50x62 (used for ball bearing 6305, 613912)

Shim -DIN 988 similar- 31x26x1.0mm (used for ball bearing 6305)

Gasket remover -NORMFEST Seal-Ex- 400ml

Liquid gasket -NORMFEST Plastomar- 85 g

Oil seal set -MB Developments- Lambretta LI 125-150 (series 2-3), LIS, SX, TV (series 2-3), GP/DL - crank shaft oil seals FKM

Oil seal 33x50x6mm (used for crankshaft drive side Lambretta LI, LIS, SX, TV (series 2-3), DL, GP)

Oil seal 33x50x6mm -MB DEVELOPMENTS Race Tour (FKM)- (used for crankshaft drive side Lambretta LI, LIS, SX, TV (series 2-3), DL, GP)

Allen screw counter sunk bolt -DIN 7991- M6 x 16mm (used for cover plate crankshaft bearing drive side Lambretta LI, LIS, SX, TV (Serie 2-3), DL, GP, J, Lui, used for cover plate clutch bearing Lambretta A, B, C, LC, D, LD)

Oil seal set engine -LAMBRETTA- LI 125-150 (series 2-3), LIS, SX, TV (series 2-3), GP/DL

Freeze spray -WEICON- 400ml