Yamaha Item number: 418VPE14
Yamaha
255,00 €*
not available
Shipping weight 1,55 kg
The STANDARD crankshafts offer the highest quality, the manufacturing accuracy and the materials used are of the highest quality. For mildly tuned and - or original engines always the right choice.
AI-translation

Rate this article now and let us know what you think.
Ball bearing
Dimensions
14x18x17mm
 
Piston pin
Diameter
14 mm
 
Crankshafts
Stroke
47.6 mm
Thread on alternator side
M12x1,25 Rechtsgewinde
Thread on drive side
M12x1,25 Rechtsgewinde
Crank web diameter
81.6 mm
Crankcase must be spindled
nein
Motor housing must be modified
nein
Rotary vane crankshaft
nein
Full cheek crankshaft
ja
Diameter of variator stub
15.7 mm
Variomatic stub design
verzahnt
can be used with original variator
ja
Wide crank webs
37.9 mm
Bearing seat diameter on alternator side
24.9 mm
Bearing seat width on alternator side
14.5 mm
Bearing seat diameter on drive side
25 mm
Bearing seat width on drive side
13.7 mm
Diameter of sealing ring seat on alternator side
19.9 mm
Wide sealing ring seat on alternator side
8.5 mm
Diameter of sealing ring seat on drive side
21.9 mm
Wide sealing ring seat on drive side
10 mm
Length of crankshaft stub on alternator side
68.5 mm
Length of crankshaft stub on drive side
73.6 mm
 
Connecting rod
Connecting rod length
90 mm
Connecting rod strength
6.5 mm
Connecting rod eye top diameter
18 mm
Lifting pin diameter
18 mm
Upper connecting rod eye lubrication hole
nein
Lower connecting rod eye lubrication hole
Schlitz
Connecting rod thrust washers
ja
 
OEM numbers (for comparison purposes only)
Scooter Center:
418VPE14