The following components are included in this set:
Stud set cylinder M8 x 165mm -BGM PRO RaceTour Ø=7,25mm Made in Italy 10.9- Lambretta LI, LIS, SX, TV (2nd series, 3rd series), DL, GP
Stud set cylinder M8 x 165mm -BGM PRO RaceTour Ø=7,25mm Made in Italy 10.9- Lambretta LI, LIS, SX, TV (2nd series, 3rd series), DL, GP
Cylinder head nut kit -BGM PRO- Lambretta LI, LIS, SX, TV (2nd series, 3rd series), DL, GP
Cylinder head nut kit -BGM PRO- Lambretta LI, LIS, SX, TV (2nd series, 3rd series), DL, GP
27,91 € *

bgm PRO stay bolt (tie rod) for fixing the cylinder and cylinder head to the engine case of all Lambretta series 1-3 models. High strength and with solid collar nuts in extra high design. Perfect for all high performance cylinders that require a solid engine base.

In principle, can also be used on Vespa 180-200cc engines. However, as a rule, these are worked for the use of the original Piaggio bolts. The original Piaggio bolts have a larger core diameter on the engine side and can therefore be screwed into the housing much tighter and with less play. Therefore, we recommend when using on Vespa engines to glue the bolts with an appropriate adhesive.

Attention!
Not suitable for Quattrini 210

AI-translation

This is how we ensure, that reviews come from real consumers.
Anonym  07/30/2015

head nuts good bit rust dust on studs

Anonym  10/14/2016

10/10

General
EAN
4250366615110
 
Matching
Accessories
Matching
Customers also bought