Cylinder head spacer -BGM PRO 177/187 cc- Vespa PX125, PX150, Cosa125, Cosa150, GTR125, TS125, Sprint Veloce (VLB1T 0150001-) - 1.5mm

Spacer nut -M7x30mm- (used for cylinder head Vespa 125-150cc (1958-), Lambretta J, Lui)

Stud set -M7 x 140mm- (used for cylinder Vespa PX80, PX125, PX150, Sprint GT125 (VNL2T), GTR125 (VNL2T), TS125 (VNL3T), Super, VNA, VNB, VBA, VBB, V90, SS90, PV125, ET3, PK80, PK125, Lambretta LD 125 (since yoc 1956), D 125 (since yoc 1956), LD 150, D 150

cylinder head nut set -NARAKU- 4 pcs - M7 thread

Nut -DIN 934- M7

Washer -DIN 125- M7

Spring washer -DIN 127- M7

Torque wrench -TOPTUL 1/4 5-25 Nm-

Work gloves - mechanics gloves - protective gloves -BGM PRO-tection- seamless knitted gloves, 100% nylon with polyurethan coating - size XL (10)

Cylinder base spacer -BGM PRO 177/187 cc- Vespa PX125, PX150, Cosa125, Cosa150, GTR125, TS125, Sprint Veloce (VLB1T 0150001-) - 0,8mm

Cylinder base spacer -BGM ORIGINAL 177/187 cc- Vespa PX125, PX150, Cosa125, Cosa150, GTR125, TS125, Sprint Veloce (VLB1T 0150001-) - 1,0mm

Cylinder base spacer -BGM ORIGINAL 177/187 cc- Vespa PX125, PX150, Cosa125, Cosa150, GTR125, TS125, Sprint Veloce (VLB1T 0150001-) - 1,5mm

Cylinder gasket set -BGM PRO 177/187cc- Vespa PX125, PX150, Cosa125, Cosa150, GTR125, TS125, Sprint Veloce (VLB1T 0150001-)

Piston locking tool (long version) -M14 x 1.25- (type NGK E-spark plug) - Vespa Smallframe V50, PV, ET3, PK, Largeframe PX, T5, Cosa, Sprint, Rally, VBB, Wideframe V1-15,V30-33, VL, VB, ACMA, Lambretta LI, SX, TV, GP

Digital degree wheel -TSR Buzzwangle Ignition and Port Timing Tool- for digital measurement of ignition timing and port timing of 2-stroke and 4-stroke engines

Ignition Timing Strobe Light Lamp -TRISCO (Prolite, Double-D) (D-Cell type)- Inductive Pick Up 6V / 12 Volt - Xenon Timing Light

Stud bolt for cylinder- M7 x 167mm -BGM PRO XXL (extra long)- Vespa PX 80-125, VNA, VNB, VBB, Vespa V50, PV125, ET3 - also suitable for series engines