bgm PRO Lambretta Lifetime Tank – durable, lightweight & rust-free 12-litre tank
Lambretta Lifetime Tanks are made of polyethylene (HDPE). Polyethylene (HDPE) is an extremely lightweight material that is resistant to ethanol. Unlike steel tanks, there is no risk of rust, corrosion, or fatigue of welded seams.
Conventional XXL tanks are often difficult to install and may contact the frame, causing excessive vibrations. They are also significantly heavier when built with sufficient wall thickness. The Lambretta Lifetime Tank holds 12 litres and is ideal for long-distance touring or riders who dislike frequent refuelling.
Advantages & features of the Lambretta Lifetime Tank
With the right preparation, these tanks can be painted and customised, just like any modern plastic bodywork.
Installation is very straightforward. The upper and lower mounting buffers ensure a solid, secure fit that lasts a lifetime. The included rubber buffers may need to be trimmed to achieve a perfect tank fit.
Installation & choosing the right fuel tap
Installing the fuel tap:
- The fuel tap is an intelligent design that is easy to fit, provides extra clearance between the tap and silent block, and allows for easy alignment of the fuel tap lever. The two O-rings are made of FPM75, resistant to E10 and ozone.
- When installing the fuel tap, never use grease on the O-rings. A light film of oil is sufficient.
- The hose clamp should be tightened with a torque of 2.5 - 3 Nm. Excess torque may damage the O-ring.
The fuel tap is available in three versions:
FAST FLOW V2.0 - BGM200011
FAST FLOW V2.0 90° - BGM200012
FAST FLOW V2.0 90°, electronic reserve indicator - BGM200013
Perfect for large carburettors – optimal cable routing
Generous cutouts on both sides provide easy access, smooth cable routing and even accommodate large carburettors.
Advantages of the Lifetime Tank:
- Impact-resistant (virtually impossible to puncture)
- Rustproof (no metal to corrode)
- Ethanol-resistant (won’t collapse or swell)
- Lightweight (possibly the lightest on the market)
- Easy to install
- 12-litre capacity
- No weld seams that could crack
Since 2021, Lambretta Lifetime Tanks have been
Made in Germany.
DE | €
