BGM PRO Item number: BGM65KTL
BGM PRO
1 Rating
Made in EU
✔️ Interchangeable with PX Lusso gears from 1984 onwards
✔️ Suitable for PX125, PX150, PX200, Cosa, T5, LML Star and Stella 2-stroke
✔️ Made from 14NiCrMo13 - extremely resilient high-performance steel
✔️ Designed for engines with over 30 hp and more than 35 Nm torque
✔️ Heat-treated at ThyssenKrupp - industrial quality standard
✔️ Surface hardness of 58 to 60 HRC with tough,
✔️ Suitable for touring and everyday use as well as for high-performance tuning engines
available immediately
Shipping weight 2 kg
299,00 € *

BGM PRO Torquemaster - gear wheels for Vespa PX Lusso

Next Level: The new BGM PRO Torquemaster gear wheels


BGM PRO Torquemaster - uncompromisingly built for extreme engines.
We have completely revised our gear wheel series. The latest evolutionary stage is the BGM PRO Torquemaster gearwheels. While the previous BGM PRO gearwheels were already extremely resilient, the new Torquemaster is a statement in terms of performance. Developed for engines with over 30 hp and over 35 Nm of torque. We were uncompromising in all respects: the choice of material, the heat treatment - nothing compares to the already good standard material. Manufactured from the same special steel that is used in high-performance gearboxes at KTM and BMW. Hardened at ThyssenKrupp, destructively tested in the laboratory - we are highly satisfied with the extreme resilience of the new gears. If maximum fatigue strength, precise dimensional accuracy and consistently good shifting performance are also important features for you, then these are your gears.

✔️ For high-end engines with 30+ HP and 35+ Nm torque
✔️ Manufactured from 14NiCrMo13 - the same special steel used in motorsport
✔️ Heat-treated at ThyssenKrupp - quality as in series production by premium manufacturers
✔️ 58-60 HRC surface hardness with a tough core structure
✔️ 100% interchangeable with all PX-Lusso gears from 1984 onwards
✔️ Suitable for PX125, PX150, PX200, Cosa, T5, LML Star and Stella 2-stroke
✔️ Suitable for everyday use - suitable for racing - uncompromising
✔️ Ideal in combination with sporty countershafts such as the BGM 12-13-16-19 (4. Gear 35T)

Material properties and heat treatment

The new BGM PRO Torquemaster gears set new standards - manufactured from 14NiCrMo13 (1.6657), a high-alloy case-hardening steel that is normally used in motorsport and motorcycle gearbox construction. Compared to the previous 20NiCrMo2-2, this results in a massive increase in load-bearing capacity:


✔️ Approx. 3.25 % nickel content
Ensures maximum toughness combined with high surface hardness - perfect for load changes, gear changes under full load or clutch impacts.

✔️ Hardness range 58-60 HRC
Extremely wear-resistant on the outside - elastic at the core. The perfect setup for maximum contact and bending loads.

✔️ High dimensional accuracy after hardening
No distortion, no reworking - the precise tooth geometry ensures smooth running-in and quiet running.

✔️ Industrial heat treatment at ThyssenKrupp
For absolutely reproducible microstructural properties - just like OEM components from mass production.

✔️ Unparalleled load capacity
Independent tests have shown that they are significantly more stable than original Piaggio gears - even under extreme conditions.

Note: Two versions available

The Torquemaster gears are available in two versions:

✔️ 4th gear with 35 teeth - corresponds to the original PX gradation. We recommend this version for powerful engines, as the tooth base is wider and more stable due to the lower number of teeth. If required, the gear jump can be shortened using a suitable auxiliary shaft (e.g. 17-20 or 16-19).

✔️ 4th gear with 36 teeth - ideal for near-series setups where a shorter gear jump from 3rd to 4th gear is to be achieved without changing the auxiliary shaft.

Compatibility

The new Torquemaster gear wheels are 100% interchangeable with all original Vespa gear wheels from Lusso design (from 1984 onwards). Suitable for the following models:

✔️ Vespa PX125 / PX150 / PX200 Lusso (1984-2016)
✔️ Vespa PX Disc, PX MY, PX 2011
✔️ Vespa Cosa 1 and 2 (all models)
✔️ Vespa T5 (all models)
✔️ LML Star 2-stroke, Stella 2-stroke

Compatible with all PX Lusso / BGM setups.

Frequently asked questions - BGM PRO Torquemaster gearwheels

Yes - all gears are available separately and can be replaced individually.
For all setups from sporty to high-performance - even with over 30 hp and more than 35 Nm torque in continuous operation.
Higher toughness, better dimensional stability after hardening and significantly higher fatigue strength - ideal for high-performance engines and demanding operating conditions.
This is how we ensure, that reviews come from real consumers.
Christoph Z. from Klagenfurt 08/16/2025
OEM numbers (for comparison purposes only)
Piaggio:
152805, 1528054, 2232314, 2232334, 2232344
Matching
Spare parts
Matching
Customers also bought