Ignition -101 OCTANE stator- Vespa PX EFL Elestart (with battery 1984-1997) -7 wire - also suitable for PX old (1981-1983) if round plug is removed

Inexpensive replacement for the original alternator / ignition of the Vespa PX Elestart models up to 1998

.

Their ignition base plate still has a total of 7 cables

.TECHNICAL INFO
Three loose cables (cable colors green, red, white) are each provided with a flat connector and intended for connection to the engine-side CDI.The other four cables (cable colors red, black, yellow, gray) are bundled in a round connector and intended for connection to the vehicle-side wiring harness.
TIP
This ignition base plate can also be used in older Vespa PX vehicles with battery (1982-1984).
Here, flat plugs were originally used on the vehicle wiring harness. Therefore, either cut off the round plug and attach single plugs or provide the vehicle-side wiring harness with a round plug.

The cable assignment here in comparison with German PX models

:

Version flat plug	Version round plug
violet	grey
red	red
yellow	yellow
black	black

This ZGP can also be used to convert Vespa PX models with contact ignition (1977-1981) to electronic ignition._{AI-translation}