MB-Developments Item number: 8000070
MB-Developments
42,90 €*
available immediately
Shipping weight 0,11 kg
Lambretta intake manifold from MB Developments for piston controlled Lambretta cylinders with 125 - 186 cc displacement. Herewith carburettors with 30 mm connection width can be installed. We recommend the Mikuni TM 24 or the Dellorto PHBL 25.

If necessary, the original air filter box can be used with these combinations. For an optimal performance we recommend the optimized bgm air filter box (BGM4488).

Under certain circumstances the sealing surfaces of the intake manifold and cylinder inlet must be adapted to each other. To do this, use an inlet gasket as a template and adjust the areas with the Dremel.

The scope of delivery includes an M7 screw which replaces the long stud bolt. When using the screw, the engine does not have to be lowered to remove the intake.

You can find suitable connecting rubbers under the article numbers: 7670780 or 1110010.
AI-translation

Rate this article now and let us know what you think.
Intake manifold
Connection width
30 mm
Fits series
Lambretta LI, LIS, SX, TV, DL, GP
Material
Aluminium
Connection type
Gummiverbindung
Intake manifold type
Kolben gesteuert
Membrane included in the scope of delivery
nein
Cylinder type
125-190ccm