Lock - Safety lock - Brake lever lock -GRIP LOCK- for brake lever, clutch lever - black

Grip-Lock express lock for throttle grip and brake lever

Grip-Lock - the express lock - easy to use, hard to pick!

The Grip-Lock security system for scooters, motorcycles and mopeds is an innovative system to protect your valuable two-wheeler from theft. Grip-Lock is simply fitted to the throttle grip and brake lever and locks them securely

.FITS
Grip-Lock therefore fits Vespa, Lambretta, almost all motorcycles, scooters, mopeds, mopeds, quads, trikes and much more.

MOUNTING
It takes less than 10 seconds to fit and remove the Grip-Lock

!PROTECTED
Grip-Lock is brightly coloured and clearly visible on the handlebars. This immediately deters potential thieves. But of course that's not enough: Grip-Lock uses four sturdy steel struts made of hardened spring steel on the inside, which effectively prevent theft with a saw or other cutting tools. The fiber-reinforced nylon sheathing makes it absolutely rustproof.

SAFE
With a locked throttle grip, you will never forget to remove the lock before riding. A forgotten lock can cause considerable damage to the vehicle in the case of a brake disc lock or other external locks.
The BASF special nylon with glass fiber reinforcement used for Grip-Lock is 200% stronger than conventional all-purpose plastic and gives the safety system particular strength and rigidity.

CLEAN
Grip-Lock is cleaner and easier to use than cumbersome and dirty brake disc locks or chain locks that have to be fumbled through frames or spokes.

DIMENSIONS
The lock is easy to stow away. Weighing just 330 grams and measuring 15 x 4.5 x 5 cm, the Grip-Lock fits in your glove compartment, helmet compartment or under the seat.

QUALITY
All Grip-Lock products are developed and manufactured under German management in Auckland, New Zealand. The locks are optimized for maximum robustness and withstand attacks with screwdrivers, handsaws, lock kits, etc. permanently and without problems.

DURABILITY
In addition, all Grip-Lock components have been subjected to a variety of accelerated ageing tests (e.g. UV test, salt vapour test, etc.). UV test, salt vapor test, etc.) to ensure that all materials used will withstand long-term outdoor use and will not become brittle or yellow.

ADAPTER
Each Grip-Lock is supplied with three adapters to ensure an optimum fit for all scooters and motorcycles. It fits handles with a diameter of 27 to 38 mm or a circumference of 85 to 119 mm. The brake lever lock of the Grip-Lock can be adjusted without tools when open.

WARRANTY
Each Grip-Lock comes with a 3-year manufacturer's warranty.