Mirror holder -CUPPINI- Vespa PX, Vespa PK

AMS CUPPINI mirror holder Ø10 mm for Vespa PX and PK

NOTE:
According to StVZO §56, every motor vehicle in Germany, including mopeds, requires at least one mirror mounted on the left-hand side of the vehicle.

NUMBER
The number of mirrors depends on the initial registration (EZ):

• EZ before 01.01.1990 1 mirror left
• EZ from 01.01.1990 up to 100 km/h 1 mirror left
• EZ from 01.01.1990 over 100 km/h 2 mirrors

SIZE
The size of the reflective surface must be

• before EZ 17.06.2003 at least 60 cm² (for round mirrors the diameter must be greater than or equal to 88 mm)
• after EZ 17.6.2003 at least 69 cm² (for round mirrors the diameter must be greater than or equal to 94 mm)

must be.

TEST MARKS:
mirrors with test marks automatically fulfill all the above conditions.

• Vehicles approved according to EC law (from 01.10.2005) must be fitted with mirrors with test mark.
• Vehicles with ABE approval (before 01.10.2005) must only use mirrors that meet the above criteria.