OEM-Qualität Item number: R100641010
OEM-Qualität
18,90 €*
available immediately
Shipping weight 0,03 kg
Set of oil seals for the crankshaft of the Minarelli MY, MA engine (Amico, SR4, Malaguti F10, F12, Centro, MBK Booster).

Oil seals are natural wear parts of every engine. If they are defective, they can no longer fulfil their very important task of sealing a shaft or axle against an undesirable medium such as air, oil and/or water. This can result in very unpleasant side effects, such as false air, which can quickly kill an engine, especially in the case of crankshafts.
Sometimes defective rotary shaft seals can also cause gradual defects that remain undetected for the time being. A slightly increased idle speed does not arouse the curiosity of inexperienced drivers, but at the latest after the jamming after a long full throttle drive the question arises: why? In order to avoid this extremely philosophical question, it is worthwhile changing shaft seals at regular intervals. Regular in this case refers to a time or kilometre interval. So from a mileage of 20000km on, an engine revision should be considered.
AI-translation

Rate this article now and let us know what you think.
Shaft seal sets
Number of shaft seals included in the scope of delivery
4
Number of O-rings included
0
Shaft seal size 1
22x32x6mm
Size of shaft seal 2
20x30/34x5/6,1mm
Shaft seal size 3
20x42/43x8/9mm
Shaft seal size 4
17x28x5mm
Shaft seal material 1
NBR
Shaft seal material 2
NBR
Shaft seal material 3
NBR
Shaft seal material 4
NBR
Coating of shaft seal ring 1
keine
Coating of shaft seal ring 2
keine
Coating of shaft seal ring 3
keine
Coating of shaft seal 4
keine
 
OEM numbers (for comparison purposes only)
Scooter Center:
R100641010