Ignition Timing Strobe Light Lamp -TRISCO (Prolite, Double-D) (D-Cell type)- Inductive Pick Up 6V / 12 Volt - Xenon Timing Light

The ignition timing is important for the thermal health of the engine and the full power development. Who rebuilds his engine should not rely on the existing markings for ignition adjustment but measure yourself. This is easily done with this electronic ignition timing gun for gasoline engines with contact or transistor ignition system (CDI ignition as in series on ET3, PK, PX, Cosa, T5 etc.).
Both 6-volt and 12-volt ignitions can be set.

Note: No external power supply is needed. For power supply two mono batteries (D, LR20, 1.5 Volt) are used, these are not included!

A super bright xenon tube and a special converging lens guarantee optimal visibility of the fixed marks even at speeds above 8000 rpm in the near field range.

The gun is connected to the spark plug cable by means of an inductive terminal (without direct contact to the stranded wire)

In addition to its use as an ignition light gun, it can also be used as a working light.

_{AI-translation}