Ignition Timing Strobe Light Lamp -TRISCO (Prolite)- Inductive Pick Up 6V / 12 Volt - Xenon Timing Light

The ignition timing is important for the thermal health of the engine and the full power development. Whoever modifies his engine should not rely on the existing markings to adjust the ignition but should measure it himself. This is easily possible with this electronic ignition timing gun for gasoline engines with contact or transistor ignition system (CDI ignition as in series with ET3, PK, PX, Cosa, T5 etc.).
Both 6-volt and 12-volt ignitions can be adjusted.

Note: No matter if 6V or 12V ignition, an external power source with 12 Volt (e.g. a car battery) is always required if the vehicle does not already have one.

A super bright xenon tube and a special converging lens guarantee optimal visibility of the fixed marks even at speeds above 8000 rpm in the near field.

The gun is connected to a 12-volt battery by means of the crocodile clips and the inductive clamp on the spark plug cable (without direct contact to the wire)

_{AI-translation}