Rear Left Floorboard Trim Plastic Underlay Royal Alloy – Black – GP, JPS, TG – Genuine Spare Part
The black plastic underlay for the rear left floorboard trim of Royal Alloy GP, JPS and TG models is a genuine spare part designed to restore the floorboard trim assembly. The component is shaped to match the contour of the rear left floorboard trim and forms part of its original factory construction.
In the event of damage, deformation or missing trim components, the plastic underlay can be replaced individually. This allows the affected area of the floorboard to be repaired without replacing other undamaged components.
Shape and Construction Features
The plastic underlay has a narrow, elongated shape with a curved profile. One section is largely straight, while the other transitions into a distinctly curved contour. This design follows the intended shape of the rear left floorboard trim.
Several recesses are positioned along the lower edge and must be taken into account when positioning and installing the component. The end sections have different shapes and are designed for the specified installation position. The black surface allows the underlay to blend discreetly into the original floorboard trim assembly.
The component is specifically designed for the left side of the vehicle. A separate, correspondingly shaped version is used on the right side.
Technical Features
- Genuine Royal Alloy spare part
- Original part number: 0312020014-10-001
- Component: plastic underlay for the rear floorboard trim
- Installation position: rear left
- Material: plastic
- Colour: black
- Elongated, curved profile with several recesses
Suitable for Royal Alloy
- Royal Alloy GP
- Royal Alloy JPS
- Royal Alloy TG
Installation Information
Before replacement, the rear left floorboard trim should be removed or the affected area exposed. It is advisable to check the adjacent trim components and existing mounting points for damage.
The new plastic underlay is positioned according to its specified contour. Particular attention should be paid to the alignment of the recesses and the differently shaped end sections. Installation should be carried out without placing the component under tension.
When selecting the replacement part, it is important to distinguish between the left and right versions as well as the different floorboard trim positions. The original part number allows the component to be identified accurately.
The genuine plastic underlay restores the intended component shape in the rear left floorboard trim area. Replacing this individual part allows damaged or missing components of the floorboard trim assembly to be renewed.
DE | €
