back

Show all articles from: Drive

Polini Item number: P2440584

Pulley unit -POLINI- Evolution P.R.E. - Piaggio 50

369,00 €*

available immediately

Shipping weight 0,85 kg

Information on product safety

Description
Suitable vehicles

High-end converter kit from Polini from the Speed Drive Evolution PRE series.

Attention:

The converter pulley must be installed with a longer V-belt!

Matching

Spare parts

Oil seal set -POLINI Speed Drive- Piaggio 50 cc, Minarelli 50 cc (type Polini Evolution 3/PRE)

Oil seal set -POLINI Speed Drive- Piaggio 50 cc, Minarelli 50 cc (type Polini Evolution 3/PRE)

Roller weights/Pulley grease -POLINI Special Grease Speed Control / Speed Drive- heat resitant - 20g

Roller weights/Pulley grease -POLINI Special Grease Speed Control / Speed Drive- heat resitant - 20g

Oil seal set -POLINI Speed Drive- Piaggio 50 cc, Minarelli 50 cc (type Polini Evolution 3/PRE)

Polini

Oil seal set -POLINI Speed Drive- Piaggio 50 cc, Minarelli 50 cc (type Polini Evolution 3/PRE)

Roller weights/Pulley grease -POLINI Special Grease Speed Control / Speed Drive- heat resitant - 20g

Polini

Roller weights/Pulley grease -POLINI Special Grease Speed Control / Speed Drive- heat resitant - 20g

Matching

Accessories

Variator-Kit -POLINI High-Speed Evolution 2 (14,8mm)- Piaggio 50cc 2T

Variator-Kit -POLINI High-Speed Evolution 2 (14,8mm)- Piaggio 50cc 2T

V-belt -POLINI Aramid Evolution (825x19,5mm)- Piaggio 50 ccm long housing

Polini
P2480372

V-belt -POLINI Aramid Evolution (825x19,5mm)- Piaggio 50 ccm long housing

Pulley -POLINI- Evolution Air Speed- Piaggio 50 ccm 2-stroke, Piaggio 50-100 ccm 4-stroke - 14°

Polini
P2440131

Pulley -POLINI- Evolution Air Speed- Piaggio 50 ccm 2-stroke, Piaggio 50-100 ccm 4-stroke - 14°

Clutch/flywheel locking tool -OEM QUALITY- Ø=90-125mm- all automatic scooters

OEM-Qualität
BGM8800

Clutch/flywheel locking tool -OEM QUALITY- Ø=90-125mm- all automatic scooters

Clutch holder - Pole wheel holder -OEM QUALITY- Universal

OEM-Qualität
BGM8801

Clutch holder - Pole wheel holder -OEM QUALITY- Universal

Contrast spring compressor tool -BUZZETTI- torque pulley up to Ø=130-155mm

Buzzetti
BU5654

Contrast spring compressor tool -BUZZETTI- torque pulley up to Ø=130-155mm

Clutch nut -M28x1- wrench size 34mm

OEM-Qualität
R25256

Clutch nut -M28x1- wrench size 34mm

Threadlock -WEICON 30243- semi strength - 10ml

Threadlock -WEICON 30243- semi strength - 10ml

Matching

Customers also bought

Star washer -PIAGGIO- Piaggio 125-180 cc - Piaggio SKR, Skipper, Hexagon, TPH125, Vespa ET4 125 (ZAPM19), Gilera Runner 125-180 FX/FXR

Piaggio
1478032

Star washer -PIAGGIO- Piaggio 125-180 cc - Piaggio SKR, Skipper, Hexagon, TPH125, Vespa ET4 125 (ZAPM19), Gilera Runner 125-180 FX/FXR

Oil -MOTUL 800 Road Racing - 2-stroke fully synthetic (double ester) - 1000ml

Oil -MOTUL 800 Road Racing - 2-stroke fully synthetic (double ester) - 1000ml

Air filter -MALOSSI Double Red Sponge- universal foam- 297x420mm

Malossi
7672957

Air filter -MALOSSI Double Red Sponge- universal foam- 297x420mm

Bearing -6304TN9C4- (20x52x15mm)- (used for crankshaft in Quattrini engine casing, flywheel and drive side Vespa PK, V50, PV125, ET3)

Bearing -6304TN9C4- (20x52x15mm)- (used for crankshaft in Quattrini engine casing, flywheel and drive side Vespa PK, V50, PV125, ET3)

Banjo bolt with bleeding screw -SPIEGLER M10 x 1 stainless steel- for brake brake caliper Stage6, bgm Pro

Spiegler
7675745VB

Banjo bolt with bleeding screw -SPIEGLER M10 x 1 stainless steel- for brake brake caliper Stage6, bgm Pro

Circlip for gudgeon pin -12mm x 1mm- C type

Malossi
9010009

Circlip for gudgeon pin -12mm x 1mm- C type

Oil seal 24x40x7mm -BGM PRO FKM/Viton® (E10/etahnol resistant)- (used for crankshaft flywheel side Vespa Rally180 (VSD1T), Vespa Rally200 (VSE1T) (till 1976)

BGM PRO
BGM1007

Oil seal 24x40x7mm -BGM PRO FKM/Viton® (E10/etahnol resistant)- (used for crankshaft flywheel side Vespa Rally180 (VSD1T), Vespa Rally200 (VSE1T) (till 1976)

Piaggio
GP573501

Piaggio
GP573502

Ball bearing for crankshaft -MALOSSI MHR C-/RC-One- (20x47x12,7mm) - C4 polyamide, ball Ø=7.9mm, carbonitrided inner ring -

Malossi
M6616334E

Ball bearing for crankshaft -MALOSSI MHR C-/RC-One- (20x47x12,7mm) - C4 polyamide, ball Ø=7.9mm, carbonitrided inner ring -

Ball/Roller bearing for crankshaft -MALOSSI MHR C-/RC-One- (20mm) -

Malossi
M6617154

Ball/Roller bearing for crankshaft -MALOSSI MHR C-/RC-One- (20mm) -

Gearbox cover -POLINI Evolution- Piaggio 50cc (1998-)

Polini
P1700299

Gearbox cover -POLINI Evolution- Piaggio 50cc (1998-)

Top

Pulley unit -POLINI- Evolution P.R.E. - Piaggio 50

Pulley unit -POLINI- Evolution P.R.E. - Piaggio 50

Pulley unit -POLINI- Evolution P.R.E. - Piaggio 50

Pulley unit -POLINI- Evolution P.R.E. - Piaggio 50

Pulley unit -POLINI- Evolution P.R.E. - Piaggio 50

Pulley unit -POLINI- Evolution P.R.E. - Piaggio 50