Royal Alloy Handle, Red, Left-Handed, for GP, GT, TG, JPS

Royal Alloy Handlebar Grip – Red – Left – GP, GT, JPS, TG

Genuine Royal Alloy left handlebar grip in red for GP, GT, JPS and TG models. The handlebar grip is designed as a vehicle-specific replacement part and is fitted to the fixed left-hand side of the handlebar. It replaces a damaged, worn or hardened genuine grip and at the same time allows the original colour scheme to be restored.

The dark red colour has a slightly muted, burgundy-like appearance. Together with the characteristic Royal Alloy embossing and classic grip profile, it creates a look that blends harmoniously with the appearance of Royal Alloy scooters.

Genuine grip for the left-hand side of the handlebar

The handlebar grip is specifically intended for the left side of the handlebar. Unlike the right-hand throttle grip, this version has no integrated throttle tube and no mechanical components for operating the throttle cable.

The continuous cylindrical inner opening accommodates the fixed handlebar tube. The grip is pushed directly onto the handlebar end and must sit securely without twisting.

Thanks to its vehicle-specific design, the genuine grip is suitable for replacing the corresponding left handlebar grip on the intended Royal Alloy models.

Dark red rubber material with profiled surface

The grip body is made from flexible rubber and is finished entirely in a dark shade of red. The surface has a predominantly matt appearance with slightly satin reflections.

The actual gripping surface has an elongated shape that is slightly curved towards the centre. Several parallel longitudinal ribs run across the grip body and structure the surface.

This profiling creates additional contact edges between the hand and the grip. At the same time, the flexible rubber material provides a slightly compliant gripping surface.

The ribs are moulded directly into the grip body. This creates a one-piece surface without applied profiles or separate decorative elements.

Royal Alloy emblem as part of the grip profile

The characteristic Royal Alloy brand emblem with the letters RA is positioned in the central area of the visible gripping surface.

The emblem is raised and moulded directly into the rubber material. The surrounding longitudinal ribs are interrupted by the brand logo and continue on either side of it.

The embossing has the same dark red colour as the entire grip body. This maintains a consistent design without additional colour accents.

The moulded RA emblem is a characteristic design feature of genuine Royal Alloy handlebar grips.

Diamond pattern and differently shaped grip ends

On the side facing the centre of the handlebar, immediately before the inner end flange, there is a narrow section with a fine diamond pattern.

The closely spaced, intersecting profiles create a distinctly textured surface. This area complements the longitudinal ribs of the main gripping surface.

The inner end is designed as a wide, disc-shaped flange. It forms the lateral boundary of the gripping area towards the handlebar controls.

At the outer end, the handlebar grip has a narrower circumferential end flange with rounded edges.

The combination of the curved grip body, different surface profiles and pronounced end boundaries corresponds to the classic Royal Alloy design.

Technical features

• Manufacturer: Royal Alloy
• Version: genuine replacement part
• Component: left handlebar grip
• Mounting position: left-hand side of the handlebar
• Material: flexible rubber
• Colour: red, dark red with a burgundy-like appearance
• Surface: predominantly matt
• Grip shape: elongated with a slightly curved central section
• Main profile: parallel longitudinal ribs
• Additional profile: narrow section with diamond pattern
• Brand emblem: moulded Royal Alloy logo with RA lettering
• Grip ends: circumferential end flanges, widened into a disc shape on the inner side
• Mounting: continuous inner opening for the handlebar tube
• Version without throttle tube
• Royal Alloy original part number: 0310030002-02-016

Suitable for Royal Alloy

• Royal Alloy GP
• Royal Alloy GT
• Royal Alloy JPS
• Royal Alloy TG

The red handlebar grip is intended for the left-hand side of the handlebar on various Royal Alloy models from the GP, GT, JPS and TG series.

Royal Alloy original part number 0310030002-02-016 identifies the red version of the left handlebar grip. The corresponding right-hand version has a different original part number and is designed for throttle operation.

When selecting the replacement part, the original part number, required colour and intended mounting position should be taken into account.

Replacement and installation instructions

Replacing the handlebar grip is particularly advisable in the event of cracks, heavy wear, hardened material or damage to the gripping surface.

Before installation, the existing left handlebar grip must be completely removed. The handlebar tube should then be checked for dirt, damage and residue and cleaned if necessary.

The new rubber grip must be pushed fully onto the left handlebar end. Care must be taken to ensure that the wide inner grip flange is correctly aligned with the handlebar controls.

After installation, the handlebar grip must sit firmly on the handlebar tube. It must not twist or move axially during normal use.

It must also be checked that the inner end flange does not interfere with adjacent controls.

Genuine Royal Alloy styling in dark red

The left Royal Alloy handlebar grip in red is a suitable solution when a worn genuine grip needs to be replaced or the original colour scheme of the handlebar needs to be restored.

With its dark red rubber construction, moulded RA emblem and combination of longitudinal ribs and diamond pattern, the replacement part retains the characteristic design of the Royal Alloy GP, GT, JPS and TG models.

Original part number 0310030002-02-016 provides clear identification of the red version for the left-hand side of the handlebar.