with E-registrationThe round LED headlight is a defining feature of the distinctive appearance of the Royal Alloy JPS range. With its large clear lens, silver-coloured reflector surfaces and prominent Royal Alloy lettering, it incorporates classic design elements while combining them with modern lighting technology. As a genuine Royal Alloy replacement part, the complete headlight assembly is intended to replace the standard headlight fitted to JPS models.
The transparent, circular lens reveals the carefully designed reflector arrangement. Reflector sections with different shapes and surface structures define the appearance of the headlight. The integrated LED technology generates the light, while the optical elements are designed to provide the intended light distribution.
A particularly striking feature is the wide horizontal lettering panel across the centre of the lens. The flowing Royal Alloy lettering stands out clearly against its finely textured surface. This design gives the headlight a distinctive identity and forms an essential part of the front-end styling of the JPS models.
The rear of the headlight assembly reveals the technical construction of the LED lighting system. A silver-coloured heat sink with pronounced cooling fins is positioned centrally on the black housing. Its purpose is to dissipate the heat generated by the LED electronics during operation.
A multi-pin electrical connector is integrated into the lower section of the housing. Threaded inserts on the sides and the designated mounting points allow installation in the vehicle-specific headlight mounting arrangement. The complete assembly is designed for the corresponding Royal Alloy JPS vehicle configuration.
The headlight is suitable for replacing a damaged or malfunctioning original headlight assembly. Before installation, the existing headlight version, mounting points and electrical connector should be compared with the replacement part. Where different vehicle configurations exist, the genuine Royal Alloy part number should be used for identification.
After replacement, the electrical functions and correct headlight alignment must be checked. The beam adjustment must comply with the manufacturer's specifications to ensure proper road illumination and prevent dazzling oncoming traffic.
Note: The headlight lens carries E-approval markings. Whether this specific headlight assembly is approved for the intended vehicle application depends on the applicable vehicle and type-approval regulations.
This genuine Royal Alloy JPS LED headlight restores the original front-end appearance of the scooter. The combination of a classic round headlight design, distinctive brand lettering and integrated LED technology preserves the unmistakable character of the JPS range.
DE | €
