Screen -PIAGGIO Cruiser- Vespa PX - clear

Original Vespa Cruiser Flyscreen from Piaggio. The windscreen is made of 4mm thick scratch and shock resistant methacrylate (Altuglas®). The material is insensitive and easy to clean.

With the small surface the windscreen not only looks sporty, but also improves the aerodynamics. The wind is directed over the rider and not infrequently this is noticeable by a higher final speed.

Thanks to the smaller surface, the sensitivity to side winds is much better than with higher windows. So an ideal touring windscreen with a sporty look.

The mounting is easy and can be done even by untrained screwdrivers.
The delivery includes the necessary mounting material.

• Width: 45cm
• Height:18.5cm

Available with clear or tinted glass

NOTE: Although the windscreen comes directly from the vehicle manufacturer, it does not have the test mark required by the TÜV. The windshield has been homologated by Piaggio directly with the vehicle.

TIP: To mount the windshield, the existing holes in the lower handlebar panelling must be widened against the direction of travel. These oblong holes are indicated by light cast seams on the inside of the fairing. The material in this area is intentionally kept very thin, so machining is easy.
_{AI-translation}