Screen -PIAGGIO Cruiser- Vespa GTS 300 (ZAPM45200, ZAPM45202), Vespa GTS Super 300 (ZAPM45200, ZAPMA3300)

Original Vespa Cruiser Flyscreen from Piaggio. The windscreen is made of 4mm thick scratch and impact resistant methacrylate (Altuglas®). The material is insensitive and easy to clean.

With the small surface the windshield does not only look sporty, also the aerodynamics are improved. The wind is directed over the rider and often this is noticeable by a higher top speed.

Due to the smaller surface the crosswind sensitivity is much better than with higher screens. So an ideal touring windshield with a sporty look.

The installation is easy and can be done even by inexperienced mechanics.
The delivery includes the necessary mounting hardware.

• Width: 47cm
• Height: 35cm

Available with clear or tinted glass

NOTE

: Although the windshield comes directly from the vehicle manufacturer, it does not have a test mark necessary for the TÜV. The screen has been homologated by Piaggio directly with the vehicle. TIP: To fit the screen, the existing holes in the lower handlebar fairing must be widened against the direction of travel. These elongated holes are predefined on the inside of the fairing, indicated by light cast seams. The material is also deliberately kept very thin in this area, so machining is easy._{AI-translation}