BGM TEST BIKE seat for Lambretta LI, SX, TV, DL, GP
Stylish BGM PRO sports seat that combines the Ancilotti and slope styles. Suitable for Lambrettas of series 1-3, Li, LiS, SX, TV, DL, GP. A longitudinally stitched seat surface, orange piping and harmonious integration into the vehicle silhouette make the BGM a real eye-catcher.
Fitting instructions
- Please remove the old seat, the air scoop and the seat mounting plate first.
- Detach the hinge plate of the BGM longtail seat from the seat.
- Fit two nuts to the two fastening screws.
- Thread the hinge plate of the BGM Longtail seat bench into the holes of the fastening bolts.
- Insert the fastening screws together with the hinge plate through the front mounting points in the frame and pre-assemble using loose nuts
.
- Now reconnect the BGM longtail seat to the hinge plate (end-tight).
- The adjusting nuts can now be used to adjust the air gap between the seat and frame to prevent contact damage when opening the seat
.
- Fit the fastening screws end-tight.
As the BGM Longtail seat does not have any mechanical locking mechanism at the rear of the frame, but is held in position by a very strong magnet, it is recommended that the contact point to the magnet on the vehicle frame is covered with a sticker, for example, to protect the valuable paintwork.
DE | €
