Seat cover for professional refurbishment of a defective seat.
The X-treme seat covers are manufactured in Europe and correspond to the original used seat. For installation, the old seat cover must be removed. This is either glued and/or fixed with clamps to the seat frame.
So that the cover can be mounted on the bench frame without wrinkles, it is made very true to size. Therefore, at first glance it seems too small.
For a perfect and wrinkle-free assembly, it is therefore necessary to fasten the cover with appropriate pretension. This is often best done in pairs and with the appropriate holding tool (e.g. grip pliers with plastic jaws).
TIP: Often, the cover of a professional is usually not expensive if the preliminary work (remove old cover, clean the seat, etc.) have already been made. Look for a saddler or upholstery store in your area.
Attention!
Cover with embossed GILERA lettering.