These are the bgm Silten blocks in
not brought to the nominal dimension. The diameter for mounting in the engine block can thus be turned down as required.
Otherwise, everything is the same as with the BGM7950G: We were so dissatisfied with the quality of all silent blocks that we took up the matter.
The main focus was on reducing vibrations, and to this end we tested all conceivable combinations of silent blocks. Different hardnesses and different hardnesses on the left and right sides.
We have now found good hardness levels for the left and right sides.
Both the installation side is marked with L (for left) and with R (for right), as well as the installation position (arrow on 12 h) is embedded in the silent blocks.
AI-translation
DE | €
