back

Show all articles from: Cylinder

CTP Chiemgau Tec Productions Item number: CTP0020

CTP Chiemgau Tec Productions

Spacer cylinder head -CTP for PINASCO 206ccm Ø=66mm- Vespa PX125, PX150, Cosa125, Cosa150, LML Star 125/150, Stella 125/150 - 0.5mm

89,00 €*

available immediately

Shipping weight 0,054 kg

Information on product safety

The star washer made by CTP has a thickness of 0.5mm. This allows the squeeze edge to be narrower than with the standard seal (1.0mm) and / or the squeeze edge can be better adapted if another stroke or the cylinder at the foot for higher control angle was underlaid. Made in Germany.

_{AI-translation}

Rate this article now and let us know what you think.

Rate this product now

OEM numbers (for comparison purposes only)

Scooter Center:

CTP0020

Matching

Accessories

Stud set - M7 x 140mm -BGM ORIGINAL- (used for cylinder Vespa PX80, PX125, PX150, Sprint GT125 (VNL2T), GTR125 (VNL2T), TS125 (VNL3T), Super, VNA, VNB, VBA, VBB, V90, SS90, PV125, ET3, PK80, PK125, Lambretta LD 125 (1956-), D 125 (1956-), LD 150, D 150)

BGM ORIGINAL
BGM27141

Stud set - M7 x 140mm -BGM ORIGINAL- (used for cylinder Vespa PX80, PX125, PX150, Sprint GT125 (VNL2T), GTR125 (VNL2T), TS125 (VNL3T), Super, VNA, VNB, VBA, VBB, V90, SS90, PV125, ET3, PK80, PK125, Lambretta LD 125 (1956-), D 125 (1956-), LD 150, D 150)

Cylinder cover -BSK for PINASCO 206 Slave (direct inlet cylinder diaphragm)- Vespa Largeframe e.g. PX, T5, Rally, Sprint, VBB - GRP

Cylinder cover -BSK for PINASCO 206 Slave (direct inlet cylinder diaphragm)- Vespa Largeframe e.g. PX, T5, Rally, Sprint, VBB - GRP

Cylinder cover -BSK for PINASCO 206 Master (rotary valve intake)- Vespa Largeframe e.g. PX, T5, Rally, Sprint, VBB - GRP

Cylinder cover -BSK for PINASCO 206 Master (rotary valve intake)- Vespa Largeframe e.g. PX, T5, Rally, Sprint, VBB - GRP

Stud bolt for cylinder- M7 x 167mm -BGM PRO XXL (extra long)- Vespa PX 80-125, VNA, VNB, VBB, Vespa V50, PV125, ET3 - also suitable for series engines

BGM PRO
BGM27167

Stud bolt for cylinder- M7 x 167mm -BGM PRO XXL (extra long)- Vespa PX 80-125, VNA, VNB, VBB, Vespa V50, PV125, ET3 - also suitable for series engines

Stud set - M7 x 140mm -BGM ORIGINAL- (used for cylinder Vespa PX80, PX125, PX150, Sprint GT125 (VNL2T), GTR125 (VNL2T), TS125 (VNL3T), Super, VNA, VNB, VBA, VBB, V90, SS90, PV125, ET3, PK80, PK125, Lambretta LD 125 (1956-), D 125 (1956-), LD 150, D 150)

BGM ORIGINAL

BGM ORIGINAL
BGM27141

Stud set - M7 x 140mm -BGM ORIGINAL- (used for cylinder Vespa PX80, PX125, PX150, Sprint GT125 (VNL2T), GTR125 (VNL2T), TS125 (VNL3T), Super, VNA, VNB, VBA, VBB, V90, SS90, PV125, ET3, PK80, PK125, Lambretta LD 125 (1956-), D 125 (1956-), LD 150, D 150)

Cylinder cover -BSK for PINASCO 206 Slave (direct inlet cylinder diaphragm)- Vespa Largeframe e.g. PX, T5, Rally, Sprint, VBB - GRP

BSK

Cylinder cover -BSK for PINASCO 206 Slave (direct inlet cylinder diaphragm)- Vespa Largeframe e.g. PX, T5, Rally, Sprint, VBB - GRP

Cylinder cover -BSK for PINASCO 206 Master (rotary valve intake)- Vespa Largeframe e.g. PX, T5, Rally, Sprint, VBB - GRP

BSK

Cylinder cover -BSK for PINASCO 206 Master (rotary valve intake)- Vespa Largeframe e.g. PX, T5, Rally, Sprint, VBB - GRP

Stud bolt for cylinder- M7 x 167mm -BGM PRO XXL (extra long)- Vespa PX 80-125, VNA, VNB, VBB, Vespa V50, PV125, ET3 - also suitable for series engines

BGM PRO

BGM PRO
BGM27167

Stud bolt for cylinder- M7 x 167mm -BGM PRO XXL (extra long)- Vespa PX 80-125, VNA, VNB, VBB, Vespa V50, PV125, ET3 - also suitable for series engines

Spacer cylinder head -CTP for PINASCO 206ccm Ø=66mm- Vespa PX125, PX150, Cosa125, Cosa150, LML Star 125/150, Stella 125/150 - 0.5mm

Spacer cylinder head -CTP for PINASCO 206ccm Ø=66mm- Vespa PX125, PX150, Cosa125, Cosa150, LML Star 125/150, Stella 125/150 - 0.5mm

Spacer cylinder head -CTP for PINASCO 206ccm Ø=66mm- Vespa PX125, PX150, Cosa125, Cosa150, LML Star 125/150, Stella 125/150 - 0.5mm