back

Show all articles from: Screws & small parts

OEM-Qualität Item number: 7675547

Tapping screw -DIN 7981 C- 3.5x13mm

0,36 €* ~~0,40 €~~

valid until 12/01/2025

11.76 %

available immediately

Shipping weight 0,001 kg

Information on product safety

Rate this article now and let us know what you think.

Rate this product now

OEM numbers (for comparison purposes only)

Piaggio:

AP8150413, AP8152334

Aprilia:

AP8150413, AP8152334

Scooter Center:

7675547

Matching

Accessories

Screwdriver Phillips (PH2) -TOPTUL Stubby-Type-

Toptul

Toptul
FBBB0203

Screwdriver Phillips (PH2) -TOPTUL Stubby-Type-

Matching

Customers also bought

Screw with flansh -M6 x 35mm- -PIAGGIO- (used for variator cover Piaggio, counterweight decompression unit Piaggio Leader AC/LC, Quasar/HPE)

Piaggio
11414838

Screw with flansh -M6 x 35mm- -PIAGGIO- (used for variator cover Piaggio, counterweight decompression unit Piaggio Leader AC/LC, Quasar/HPE)

Lock washer rear hub nut -PIAGGIO- Vespa PX (since 1984), PK XL, Cosa, Piaggio automatic scooter, Gilera automatic scooter

Piaggio
1194423

Lock washer rear hub nut -PIAGGIO- Vespa PX (since 1984), PK XL, Cosa, Piaggio automatic scooter, Gilera automatic scooter

Toothed drive belt oil pump -PIAGGIO- Piaggio 50 cc 2-stroke, Piaggio 80 cc 2-stroke

Piaggio
1286162

Toothed drive belt oil pump -PIAGGIO- Piaggio 50 cc 2-stroke, Piaggio 80 cc 2-stroke

Float chamber (with drain) -DELLORTO- PHVA Vergaser Ø=17,5mm (Piaggio Engines)

Piaggio
1484704

Float chamber (with drain) -DELLORTO- PHVA Vergaser Ø=17,5mm (Piaggio Engines)

Carburettor gasket set -DELLORTO- PHVA

Dellorto
1498409

Carburettor gasket set -DELLORTO- PHVA

Lock washer kit rear hub nut -PIAGGIO M16, SW24- Vespa PX (1984-), PK XL, Cosa, Piaggio automatic, Gilera automatic

Piaggio
1R000031

Lock washer kit rear hub nut -PIAGGIO M16, SW24- Vespa PX (1984-), PK XL, Cosa, Piaggio automatic, Gilera automatic

Needle plate -DELLORTO- PHBN, PHVA

Dellorto
2599003

Needle plate -DELLORTO- PHBN, PHVA

Plate -PIAGGIO- M5

Piaggio
3330412

Plate -PIAGGIO- M5

Plate -PIAGGIO- Ø=3.5mm - 11x16mm (used for cylinder cwoling / flywheel cover Vespa PX)

Piaggio
3330502

Plate -PIAGGIO- Ø=3.5mm - 11x16mm (used for cylinder cwoling / flywheel cover Vespa PX)

Spray wax, hardening and crystal clear -HODT MULTI FILM Klar- spray can 1000ml spray, brush or dip

Spray wax, hardening and crystal clear -HODT MULTI FILM Klar- spray can 1000ml spray, brush or dip

Rust eraser -LESSMANN- Steel wire 5/8mm

Lessmann
3334037

Rust eraser -LESSMANN- Steel wire 5/8mm

Splint -ISO 1234- Ø=3,5 x 32mm (used for front wheel axle Vespa PK, PX, Cosa, T5 125ccm - rear wheel axle Vespa PK, PX, Cosa, T5 125ccm, Rally, Sprint, TS, GT, GTR, Super, V50, PV125, ET3, all Piaggio/Gilera 50cc Automatic)

Normfest
4940034

Splint -ISO 1234- Ø=3,5 x 32mm (used for front wheel axle Vespa PK, PX, Cosa, T5 125ccm - rear wheel axle Vespa PK, PX, Cosa, T5 125ccm, Rally, Sprint, TS, GT, GTR, Super, V50, PV125, ET3, all Piaggio/Gilera 50cc Automatic)

%

Tapping screw -DIN 7981 C- 3.5x13mm

Tapping screw -DIN 7981 C- 3.5x13mm

Tapping screw -DIN 7981 C- 3.5x13mm