Naraku Item number: NK90058
Naraku
77,00 €*
Ready for dispatch in 72h
Shipping weight 0,57 kg
With the NARAKU HS Racing variator, the manufacturer offers a sophisticated high speed variator for Minarelli based 2-stroke engines with 16mm crankshaft stub. The variator is supplied with the CNC turned HS V-belt pulley. The through gearing of the intake allows a much better power transmission and you can finally do without the vulnerable star pulley. Very good torque and best acceleration values.

The advanced V.2 version is now delivered with 3 sets of 15x12 variator pulleys in 5.0g, 5.5g and 6.0g!

According to the manufacturer, the variator sleeve included in the delivery should only be used in conjunction with a sports exhaust or a 70cc cylinder. Due to the shorter design of the sleeve, the variator gets into a very large gear ratio with significantly more high speed. Prerequisite for this is of course sufficient engine power. On 50cc standard engines simply use the sleeve of the original variator.AI-translation

Rate this article now and let us know what you think.
Variomatics
Dimensions Weights
15x12mm
Number of weights used in variomatics
6
Number of weight sets included in the scope of delivery
1
Mass weight set 1
5 g
Mass Weight set 2
5.5 g
Mass weight set 3
6 g
Counter pressure spring included in the scope of delivery
nein
Number of counter pressure springs included in the scope of deli
1
V-belt included in the scope of delivery
nein
Riser disk included in the scope of delivery
ja
Driving pulley included in the scope of delivery
nein
Varioshims included in the scope of delivery
nein
Overrange
nein
Geared pulleys included in the scope of delivery
nein
Vario bushing for original shaft included in scope of delivery
ja
Vario bushing for high-end shaft included in scope of delivery
nein
 
General
EAN
4250362415554