3rd gear cog -PREDIERI & ABBATE- Vespa P-range (-1984) 125-200cc - 38 teeth

Clutch friction plate set -VESPA type 7 springs- 3 friction plates

Exhaust manifold clamp -UNIVERSAL high pression type- Ø=48-51mm

Plug for oilpump hole -OEM QUALITY- Vespa Vespa PX80, PX125, PX150, PX200, T5 125cc, Cosa125-200 - alloy

CDI/HT coil support set -PIAGGIO- Vespa PX Elestart

Crimp terminal -ring tongue M3 (3.5mm) Ø=0.5-1.0mm²- 10 pcs

2nd gear cog -OEM QUALITY- Vespa PX Lusso/EFL 125ccm, 150ccm, 200 ccm, T5 125ccm, Cosa, LML Star/Stella 2-stroke - 42 teeth - fits also P-Range (1982-) 125ccm, 150ccm, 200 ccm, Rally 180/200

Gear cluster with primary gear -OEM QUALITY- Vespa PX125 (VNX1T, 146314-), PX150 (264565-), T5 125cc, Cosa - 12-13-17-21 teeth with primary gear 68 teeth

Gear cluster shaft -OEM QUALITY- Vespa PX125, PX150, PX200, Cosa, T5 125cc - bearing seat: Ø=15mm, bushing: Ø=13mm, length: 121mm

Universal inner cable -Ø=1,6mm x 2000mm, nipple Ø=5,5mm x 7mm- used as gear change cable - laid cable

Universal inner cable -Ø=1,2mm x 2000mm, nipple Ø=5,5mm x 7mm- used as throttle cable - laid cable

Cruciform -OEM QUALITY- Vespa PX old type 80 ccm (V8X1T until no. 100230), 125 cc (VNX2T until no. 232052), 150 cc (VLX1T until no. 624301), 200 cc (VSX1T until no. 315266), Rally180 (VSD1T) (since no. 26849), Rally200 (VSE1T) (since no. 4476), Sprint (si

Washer gear selector rod -OEM QUALITY- PX (-1984)