back

Show all articles from: Drive

FAG Item number: 7674629

Bearing -16004- (20x42x8mm) - (used for rear bevel gear on drive shaft Lambretta D, LD)

8,90 €*

available immediately

Shipping weight 0,05 kg

Information on product safety

Rate this article now and let us know what you think.

Rate this product now

Ball bearing

Identifier

16004

Inner diameter

25 mm

Outside diameter

42 mm

Width

8 mm

Dimensions

25x42x8mm

OEM numbers (for comparison purposes only)

Innocenti:

07330207

Scooter Center:

7674629

Matching

Accessories

Syringe -B.BRAUN Injekt® Solo- PE - 20ml

B.Braun
3331021

Syringe -B.BRAUN Injekt® Solo- PE - 20ml

Bearing grease -HANSELINE- 50g

Hanseline
3600012

Bearing grease -HANSELINE- 50g

Delivery date

Lithium grease -MOTOREX 176GP- 250g - water resistant grease for steering bearing, gear change grip, throttle tube, centre stand, swinging arm bearing

Motorex
7673780

Lithium grease -MOTOREX 176GP- 250g - water resistant grease for steering bearing, gear change grip, throttle tube, centre stand, swinging arm bearing

High preassure grease -MOTOREX Grease 3000- 850g - for bearings, wheel axle, -30°-+150°, high viscosity (NLGI2)

Motorex
7673781

High preassure grease -MOTOREX Grease 3000- 850g - for bearings, wheel axle, -30°-+150°, high viscosity (NLGI2)

Circlip -SHAFT DIN471- Ø=22mm - for fitting front hub Vespa PX EFL/Lusso (1983-) PX80, PX125, PX150, PX200, PK50 XL, PK50 XL2, PK125 XL, Cosa125, Cosa 200, T5 125cc

OEM-Qualität
9000063

Circlip -SHAFT DIN471- Ø=22mm - for fitting front hub Vespa PX EFL/Lusso (1983-) PX80, PX125, PX150, PX200, PK50 XL, PK50 XL2, PK125 XL, Cosa125, Cosa 200, T5 125cc

Freeze spray -WEICON- 400ml

Freeze spray -WEICON- 400ml

Matching

Customers also bought

Mirror -BUMM clip on- Chrome Vespa/Lambretta universal small - left hand side

Mirror -BUMM clip on- Chrome Vespa/Lambretta universal small - left hand side

Delivery date

Jet -DELLORTO (type: 1486)- 5mm (120)

Dellorto
2505120

Jet -DELLORTO (type: 1486)- 5mm (120)

Main jet set -BGM PRO for Dellorto (type: 1486) 5mm- (50-72) - (50-52-55-58-60-62-65-68-70-72)

BGM PRO
2599114

Main jet set -BGM PRO for Dellorto (type: 1486) 5mm- (50-72) - (50-52-55-58-60-62-65-68-70-72)

Spark Plug -NGK B ES- B7ES

Spark Plug -NGK B ES- B7ES

Spark plug -NGK CR HS- CR7HS

Spark plug -NGK CR HS- CR7HS

Spark plug connector -NGK 5kΩ classic 90° - 10-12mm spark plug

Spark plug connector -NGK 5kΩ classic 90° - 10-12mm spark plug

Tyre levers -ECON- l=280mm

Tyre levers -ECON- l=280mm

Mirror -CASA LAMBRETTA- round - length stem 320 mm, diameter 110 mm, adjustable bar - chrome

Casa Lambretta
3331534

Mirror -CASA LAMBRETTA- round - length stem 320 mm, diameter 110 mm, adjustable bar - chrome

Ball bearing -6201 2RS (both sides sealed)- (12x32x10mm) - (used for front wheel/brake drum all Lambretta models, Vespa PX (-1982))

Ball bearing -6201 2RS (both sides sealed)- (12x32x10mm) - (used for front wheel/brake drum all Lambretta models, Vespa PX (-1982))

Universal inner cable -Ø=1,2mm x 2500mm, nipple Ø=3,0mm x 3mm- used as throttle cable - plaited cable

BGM ORIGINAL
4350007

Universal inner cable -Ø=1,2mm x 2500mm, nipple Ø=3,0mm x 3mm- used as throttle cable - plaited cable

Trunnion -UNIVERSAL- Ø=4.0mm x 9mm (used for throttle cable)

OEM-Qualität
4350024

Trunnion -UNIVERSAL- Ø=4.0mm x 9mm (used for throttle cable)

Tube -HEIDENAU 8 inch- 3.50-8, 4.00-8, 110/80-8, 120/70-8 - valve position Vespa / Lambretta type

Heidenau
6000022N

Tube -HEIDENAU 8 inch- 3.50-8, 4.00-8, 110/80-8, 120/70-8 - valve position Vespa / Lambretta type

Bearing -16004- (20x42x8mm) - (used for rear bevel gear on drive shaft Lambretta D, LD)

Bearing -16004- (20x42x8mm) - (used for rear bevel gear on drive shaft Lambretta D, LD)

Bearing -16004- (20x42x8mm) - (used for rear bevel gear on drive shaft Lambretta D, LD)