back

Show all articles from: Overhaul set

BGM PRO Item number: BGM1110

Bearing and oil seal set for crankshaft -BGM PRO FKM/Viton® (E10/etahnol resistant)- Vespa PX - rubber type - incl. O-rings

3 Ratings

48,90 €*

not available

Shipping weight 0,33 kg

Send me an e-mail as soon as the item is back in stock.

Information on product safety

In addition to quality bearings, the BGM PRO bearing set also contains high-quality BGM PRO FKM oil seals.
These are ethanol-resistant and therefore also approved for use with E10.

The BGM PRO ball bearing set for the crankshaft including the enclosed very high quality oil seal clearly exceed the quality level of the original equipment.

_{AI-translation}

This is how we ensure, that reviews come from real consumers.

Anonym 05/24/2016

günstig und gut

Anonym 04/15/2016

Bestes lagerset

Anonym 05/06/2025

Rate this product now

General

Quantity included in delivery

2

EAN

4250366600376

Shaft seal sets

Number of shaft seals included in the scope of delivery

2

Shaft seal size 1

31x62,5x6mm

Size of shaft seal 2

24x35x6mm

Shaft seal material 1

NBR

Shaft seal material 2

NBR

Coating of shaft seal ring 1

keine

Coating of shaft seal ring 2

keine

Ball bearing sets

Size bearing 1

25x62x12mm

Size bearing 2

25x38x15mm

Designation Bearing 1

613912

Designation bearing 2

NBI 253815

OEM numbers (for comparison purposes only)

Scooter Center:

BGM1110

Matching

Spare parts

Oil seal set engine -BGM PRO, FKM/Viton® (E10/etahnol resistant) rubber,brown- Vespa Largeframe PX (-1984), P80X, P125X, P150X, P200E, Rally200 (VSE1T, 33997-, Ducati), Sprint Veloce150 (VLB1T,294260-), GTR125 (VNL2T, 145901-), TS125 (VNL3T, 18139-) - ext

BGM PRO
BGM1140

Oil seal set engine -BGM PRO, FKM/Viton® (E10/etahnol resistant) rubber,brown- Vespa Largeframe PX (-1984), P80X, P125X, P150X, P200E, Rally200 (VSE1T, 33997-, Ducati), Sprint Veloce150 (VLB1T,294260-), GTR125 (VNL2T, 145901-), TS125 (VNL3T, 18139-) - ext

O-ring set engine (7 pcs)-VESPA- PX, T5 125cc, Rally180 (VSD1T), Rally200 (VSE1T), Sprint150 (VLB1T), TS125 (VNL3T), GT125 (VNL2T), GTR125 (VNL2T)

O-ring set engine (7 pcs)-VESPA- PX, T5 125cc, Rally180 (VSD1T), Rally200 (VSE1T), Sprint150 (VLB1T), TS125 (VNL3T), GT125 (VNL2T), GTR125 (VNL2T)

Needle roller bearing -NBI 253815- (25x38x15mm) - (used for crankshaft flywheel side Vespa PX, Cosa, PK125 ETS, Rally200 (Ducati))

Nadella
3720002

Needle roller bearing -NBI 253815- (25x38x15mm) - (used for crankshaft flywheel side Vespa PX, Cosa, PK125 ETS, Rally200 (Ducati))

O-ring 57.0x2.0mm rear hub dust cover/engine -VESPA- PX, Vespa Rally180 (VSD1T), Vespa Rally200 (VSE1T), Sprint150 (VLB1T), TS125 (VNL3T), GT125 (VNL2T), GTR125 (VNL2T)

Piaggio
7078163

O-ring 57.0x2.0mm rear hub dust cover/engine -VESPA- PX, Vespa Rally180 (VSD1T), Vespa Rally200 (VSE1T), Sprint150 (VLB1T), TS125 (VNL3T), GT125 (VNL2T), GTR125 (VNL2T)

Ball bearing -613912- (25x62x12mm) 8 balls - (used for crankshaft, drive side Vespa PX, T5 125cc, Rally180 (VSD1T), Rally200 (VSE1T), Sprint, GS150 / GS3... - crankshaft, flywheel side Sprint, GS150 / GS3, VNA, VNB, VBA, VBB...)

Nadella
3720001

Ball bearing -613912- (25x62x12mm) 8 balls - (used for crankshaft, drive side Vespa PX, T5 125cc, Rally180 (VSD1T), Rally200 (VSE1T), Sprint, GS150 / GS3... - crankshaft, flywheel side Sprint, GS150 / GS3, VNA, VNB, VBA, VBB...)

O-ring Ø12x9x1.7mm -PIAGGIO- used for clutch arm Vespa V50, PK, PX, T5, Cosa, Rally, Sprint, TS125, GT125, GTR125, GL150, GS160 / GS4, SS180, rear brake cam VNA, VBA, VNB1-3T, VBA, VBB1T, VGLA, VGLB

Piaggio
9020090

O-ring Ø12x9x1.7mm -PIAGGIO- used for clutch arm Vespa V50, PK, PX, T5, Cosa, Rally, Sprint, TS125, GT125, GTR125, GL150, GS160 / GS4, SS180, rear brake cam VNA, VBA, VNB1-3T, VBA, VBB1T, VGLA, VGLB

O-ring set rear hub dust cover/engine -PIAGGIO 22.0x2.5mm- Vespa PX, T5 125cc, Rally, Sprint, TS125, GT125, GTR125, Super

Piaggio
7139433

O-ring set rear hub dust cover/engine -PIAGGIO 22.0x2.5mm- Vespa PX, T5 125cc, Rally, Sprint, TS125, GT125, GTR125, Super

O-ring 119x2.00mm -PIAGGIO- used for clutch cover Vespa PX, T5 125cc, Cosa2, Vespa Rally, Sprint150, TS125, GT125, GTR125, Super, SS180, GS160 / GS4, VNA, VNB, VBA, VBB

Piaggio
9020058

O-ring 119x2.00mm -PIAGGIO- used for clutch cover Vespa PX, T5 125cc, Cosa2, Vespa Rally, Sprint150, TS125, GT125, GTR125, Super, SS180, GS160 / GS4, VNA, VNB, VBA, VBB

Matching

Accessories

Syringe -B.BRAUN Injekt® Solo- PE - 20ml

B.Braun
3331021

Syringe -B.BRAUN Injekt® Solo- PE - 20ml

Magnetic bowl -OEM QUALITY- rectangular 240 x 140 x 45mm

OEM-Qualität
3331568

Magnetic bowl -OEM QUALITY- rectangular 240 x 140 x 45mm

Heat gun -OEM QUALITY- 300-1800 Watt 50-550°C, steplessy adjustable temperature

OEM-Qualität
3332111

Heat gun -OEM QUALITY- 300-1800 Watt 50-550°C, steplessy adjustable temperature

Liquid gasket -CORTECO Evo300- +250°C - 70ml

Corteco
3332471

Liquid gasket -CORTECO Evo300- +250°C - 70ml

Liquid gasket -LOXEAL silicone (59-30) +300°C - 75ml

Liquid gasket -LOXEAL silicone (59-30) +300°C - 75ml

Brake cleaner -NORMFEST MC1- 500ml

Normfest
3600007

Brake cleaner -NORMFEST MC1- 500ml

Liquid gasket -WÜRTH Silikon Spezial- 70 ml

Liquid gasket -WÜRTH Silikon Spezial- 70 ml

Bearing grease -HANSELINE- 50g

Hanseline
3600012

Bearing grease -HANSELINE- 50g

Locking ring drive side bearing -TD-Customs- Vespa P -bolt on type

TD-Customs
7670877

Locking ring drive side bearing -TD-Customs- Vespa P -bolt on type

Lithium grease -MOTOREX 176GP- 250g - water resistant grease for steering bearing, gear change grip, throttle tube, centre stand, swinging arm bearing

Motorex
7673780

Lithium grease -MOTOREX 176GP- 250g - water resistant grease for steering bearing, gear change grip, throttle tube, centre stand, swinging arm bearing

High preassure grease -MOTOREX Grease 3000- 850g - for bearings, wheel axle, -30°-+150°, high viscosity (NLGI2)

Motorex
7673781

High preassure grease -MOTOREX Grease 3000- 850g - for bearings, wheel axle, -30°-+150°, high viscosity (NLGI2)

Gasket remover -BGM ORIGINAL- 23mm

BGM ORIGINAL
7673834

Gasket remover -BGM ORIGINAL- 23mm

Gasket remover -NORMFEST Seal-Ex- 400ml

Normfest
7675219

Gasket remover -NORMFEST Seal-Ex- 400ml

Work gloves - mechanics gloves - protective gloves -BGM PRO-tection- seamless knitted gloves, 100% nylon with polyurethan coating - size L (9)

BGM PRO
BGM0400L

Work gloves - mechanics gloves - protective gloves -BGM PRO-tection- seamless knitted gloves, 100% nylon with polyurethan coating - size L (9)

Freeze spray -WEICON- 400ml

Freeze spray -WEICON- 400ml

Matching

Customers also bought

Circlip -PIAGGIO- Ø=48mm x 1,5mm - used for driveshaft PK XL/XL2, PX, T5, Cosa

Piaggio
1009101

Circlip -PIAGGIO- Ø=48mm x 1,5mm - used for driveshaft PK XL/XL2, PX, T5, Cosa

Kickstart spring -PIAGGIO- Vespa PX, T5 125cc, Cosa, Rally180 (VSD1T), Rally200 (VSE1T), Sprint150 (VLB1T), TS125 (VNL3T), GT125 (VNL2T), GTR125 (VNL2T), Super, GS160 / GS4 (VSB1T), SS180 (VSC1T), GL150 (VLA1T), VNA, VNB, VBA, VBB

Piaggio
1047218

Kickstart spring -PIAGGIO- Vespa PX, T5 125cc, Cosa, Rally180 (VSD1T), Rally200 (VSE1T), Sprint150 (VLB1T), TS125 (VNL3T), GT125 (VNL2T), GTR125 (VNL2T), Super, GS160 / GS4 (VSB1T), SS180 (VSC1T), GL150 (VLA1T), VNA, VNB, VBA, VBB

V-Ring Ø=18x3x22mm fork link inner -VESPA- PX (till 1982), V50, PV125, ET3, SS50, SS90

Piaggio
1050242

V-Ring Ø=18x3x22mm fork link inner -VESPA- PX (till 1982), V50, PV125, ET3, SS50, SS90

Badge legshield -VESPA- Vespa - Vespa PK

Piaggio
1151728

Badge legshield -VESPA- Vespa - Vespa PK

Engine gasket set -VESPA- PX80, PX125, PX150 EFL, Cosa 125

Engine gasket set -VESPA- PX80, PX125, PX150 EFL, Cosa 125

Washer silent rubber/front shockabsorber -PIAGGIO- Vespa PX80, PX125, PX150, PX200, T5 125cc, Cosa, PK S-XL, GT-GTV, LX-LXV, ET2, ET4, S, Piaggio Zip SP, Hexagon, MP3, Quartz, SKR, Gilera Fuoco

Piaggio
1174088

Washer silent rubber/front shockabsorber -PIAGGIO- Vespa PX80, PX125, PX150, PX200, T5 125cc, Cosa, PK S-XL, GT-GTV, LX-LXV, ET2, ET4, S, Piaggio Zip SP, Hexagon, MP3, Quartz, SKR, Gilera Fuoco

Oil seal (with dust lip) 24x35x7mm -CORTECO brown FKM (E10/etahnol resistant)- used for crankshaft Piaggio 125-180 cc 2-stroke (SKR, Runner, Dragster, TPH), fits also Vespa PX, ETS, T5, Cosa, LML Star 2T

Corteco
1434582

Oil seal (with dust lip) 24x35x7mm -CORTECO brown FKM (E10/etahnol resistant)- used for crankshaft Piaggio 125-180 cc 2-stroke (SKR, Runner, Dragster, TPH), fits also Vespa PX, ETS, T5, Cosa, LML Star 2T

Speedometer cable bushing -PIAGGIO- Vespa PX (from 1998), Grimeca Classic, LX, LXV, S, ET2, ET4, GT, GT L, GTS 125-300, GTS 125-300 i.e. Super, GTV, Piaggio Hexagon GT, GTX, Zip 2, Zip SP

Piaggio
1564053

Speedometer cable bushing -PIAGGIO- Vespa PX (from 1998), Grimeca Classic, LX, LXV, S, ET2, ET4, GT, GT L, GTS 125-300, GTS 125-300 i.e. Super, GTV, Piaggio Hexagon GT, GTX, Zip 2, Zip SP

Crankshaft -MAZZUCCHELLI RACING (for diaphragm intake) 60mm stroke, full cheek- Vespa PX200

Mazzucchelli
1620012

Crankshaft -MAZZUCCHELLI RACING (for diaphragm intake) 60mm stroke, full cheek- Vespa PX200

Grommet speedo cable/hub back plate -PIAGGIO- Vespa PX, T5 125cc, PK S, PK XL

Grommet speedo cable/hub back plate -PIAGGIO- Vespa PX, T5 125cc, PK S, PK XL

Clutch locking tool -VESPA- all Largeframe and Wideframe models

BGM ORIGINAL
1800004

Clutch locking tool -VESPA- all Largeframe and Wideframe models

Flanging pliers for legshield trim -OEM QUALITY, ECO (steel)- all Vespa models

OEM-Qualität
1800012

Flanging pliers for legshield trim -OEM QUALITY, ECO (steel)- all Vespa models

Bearing and oil seal set for crankshaft -BGM PRO FKM/Viton® (E10/etahnol resistant)- Vespa PX - rubber type - incl. O-rings

Bearing and oil seal set for crankshaft -BGM PRO FKM/Viton® (E10/etahnol resistant)- Vespa PX - rubber type - incl. O-rings

Bearing and oil seal set for crankshaft -BGM PRO FKM/Viton® (E10/etahnol resistant)- Vespa PX - rubber type - incl. O-rings

Bearing and oil seal set for crankshaft -BGM PRO FKM/Viton® (E10/etahnol resistant)- Vespa PX - rubber type - incl. O-rings

Bearing and oil seal set for crankshaft -BGM PRO FKM/Viton® (E10/etahnol resistant)- Vespa PX - rubber type - incl. O-rings

Bearing and oil seal set for crankshaft -BGM PRO FKM/Viton® (E10/etahnol resistant)- Vespa PX - rubber type - incl. O-rings

Bearing and oil seal set for crankshaft -BGM PRO FKM/Viton® (E10/etahnol resistant)- Vespa PX - rubber type - incl. O-rings