Brake pads -BGM PRO Sintersport 54x50.7mm- APRILIA Leonardo 125cc 4-stroke 1999 (r), Leonardo 4-stroke 150cc 1999 (f/r), Scarabeo 4-stroke 100cc 2004 (f), Scarabeo 4-stroke 50cc 2004 (f), SR 150cc 2000 (f), YAMAHA SR 125cc 1998 (f)

We have tried with the help of all available manufacturer information and our years of experience to address the issue of brake components as error-free as possible,
but this is unfortunately not 100% possible.
Depending on the availability at the time of vehicle production, the vehicle manufacturer can come to different combinations of the installed components.
Therefore, we must ask you in case of doubt before ordering to check the compatibility based on the product photos and the specified dimensions.
Of course, a return of incorrectly ordered items is sufficiently stamped and in mint / saleable condition within the statutory periods possible.
Thank you for your understanding.

Brake pads BGM PRO Sintersport - massive stopping power

The BGM PRO sintered brake pads are pads of a new generation. They are full metal brake pads, which are produced in a complex sintering process.
With these pads, braking performance is achieved that meets the very highest demands.
QUALITY
BGM Pro brake pads are manufactured exclusively for BGM by one of the most prestigious Italian brake pad manufacturers
.

MATERIAL + PERFORMANCE
The pad compound for the BGM PRO sintered brake pad has a high coefficient of friction, averaging over µ=0.46, with a maximum of µ=0.52.
An aggressive braking action and very short braking time are the advantages of the sintered pad

.

DOSAGE + RESPONSE

The braking performance is powerful from the start, but at the same time easy to calculate and dose. These good properties do not diminish even under high loads.

• Highest possible mechanical connection between lining and base plate
• Very high corrosion resistance
• Very high coefficient of friction at all temperatures
• Efficient in all weather

conditions

• No break-in period
• Copper-coated base plate
• Suitable for all steel discs
• Naturally with TÜV approval / KBA number

ENVIRONMENT

The BGM brake lining material is manufactured without the use of solvents.

It contains no heavy metal compounds and of course no asbestos. Manufactured according to ECE R-90.

SUPPLY

The scope of delivery includes:

• 1 pair of disc brake pads

CONCLUSION: Quality and brake performance at a professional level

.
_{AI-translation}