Carburator kit -MALOSSI DELLORTO PHBH 30 BD, reed valve X360- Vespa PX200, Cosa 200, Rally200 - CS=34mm

Carburettor kit -MALOSSI 30mm Dellorto PHBH BD,Diaphragm X360

Diaphragm kit with type AM6 diaphragm, the new intake manifold X360 from Malossi for the 200cc engines with long carburetor bowl sealing surface. The set includes a 30mm Dellorto PHBH BD carburettor. There are 2 threaded sleeves included, which are screwed into the original M7 bolting points. Now the box can be fixed with M6 hexagon socket screws. The intake manifold can be rotated as desired and seals with a lip to the retaining plate.

Scope of delivery

• Gasket, clamp

• 2 screws, threaded sleeves

• Diaphragm case, diaphragm

• Intake manifold AW 34, retaining plate

• Carburettor 30mm PHBH BD

• Choke, throttle cable

• Gasket, hose clamp, replacement rubber
  
  
  

Attention: The connecting piece fits only on engines, whose carburetor sealing surfaces have a length of min.70mm between the carburetor stud holes measured in driving direction.

(TW021221)