Choke mechanism -POLINI- Ø=17,5-34mm

Carburettor -POLINI- CP 23mm - CS=Ø28,5mm

Clutch sprocket -OEM QUALITY, Vespa type 6 springs (PX80, PX125, PX150)- for genuine primary gear (helical teeth) 67/68 teeth - 22 teeth (total height 32.5mm, sprocket height 11mm)

Exhaust -BGM PRO TOURING - Vespa Wideframe (lamp below) VM, VN, VL1T, VB1T, VGL1T, Motovespa, Acma, Douglas

Carb rubber Carburator/intake manifold -BGM PRO- CS=28.5/28.5mm

Intake manifold for BGM1550 -BGM PRO Ø24mm fits Dellorto PHBL24/25, Polini CP23/24- Vespa Wideframe 125cc Vespa V1-V15, V30-V33, VN, VM, Vespa ACMA 125 (1951-1955), Vespa Hoffmann A, B, C, M24, Motovespa 125N (V33M, V34M, V35M)

Air filter -BGM PRO by Marchald- for Polini CP carburettors Ø17.5-19-21-23-24mm, CS Ø=46mm, L=30mm

Spacer clutch cover -BGM PRO- Vespa Wideframe VM1T, VM2T, VN1T (-60000), VU1T, ACMA 125 (1951-1955), Motovespa 125N (1953-1958) - Ø=128x1,5mm

Gasket for clutch cover spacer -BGM PRO- Vespa Wideframe VM1T, VM2T, VN1T (-60000), VU1T, ACMA 125 (1951-1955), Motovespa 125N (1953-1958) - Ø=128x0.5mm

Main jet -POLINI- (type: 99101-357) CP/PWK- 86

hose clamp -101 OCTANE- 25-40mm