Clutch -EGIG PERFORMANCE- One Finger Clutch 2.0 STD - 5-disc, cone- Vespa V50, V90, SS50, SS90, PV125, ET3, PK50, PK80, PK50 S, PK80 S, PK125 S, PK50 XL, PK125 XL, ETS, PK50 HP, PK50 SS

Name: Clutch -EGIG PERFORMANCE- One Finger Clutch 2.0 STD - 5-disc, cone- Vespa V50, V90, SS50, SS90, PV125, ET3, PK50, PK80, PK50 S, PK80 S, PK125 S, PK50 XL, PK125 XL, ETS, PK50 HP, PK50 SS
Brand: Egig Performance
SKU: 3334007
Price: 239.00 EUR
Availability: InStock

STD version: 5 organic friction disks (cork) + 4 steel intermediate disks

Cone mount for standard auxiliary shaft

2.0 basic design: more space to the basket, can no longer sit on it

Bearing-mounted pressure plate included

Oil recommendation: 500 ml SAE 30 - usually no spacers

239,00 €*

available immediately

Shipping weight 0,69 kg

Information on product safety

Report error

Description
Suitable vehicles

EGIG One Finger Clutch 2.0 - 5 disks - STD version (cone)

The EGIG One Finger Clutch 2.0 as STD version with cone mount is the uncomplicated solution for anyone looking for a 5-disc package with very easy operation - without a special auxiliary shaft. More friction surface means: less spring force for the same holding power. With an XL2 cover, the whole thing is extremely comfortable in everyday use - "One Finger" is not a marketing slogan here, but exactly the effect of the 5-disc package.

2.0 construction 5 disks STD (cork) cone Bearing-mounted pressure plate

What you get (STD cone)

5 organic friction disks (cork)

4 steel intermediate plates

Clutch hub: Cone

Bearing-mounted pressure plate

Power range (guide values)

6 springs: up to approx. 30 hp and 26 Nm

8 springs: up to approx. 39 hp and 32 Nm

Note: Extra inner springs (8+4 / 8+8) are optional for this version, but must be purchased separately.

Important notes (short)

Repkit: only for repair kits bolted from the rear (bolt heads may protrude on externally bolted kits)

Oil: 500 ml SAE 30

Secondary shaft nut: incl. washer max. 7 mm high, thread must not protrude

Differences between the versions - which one suits me?

Cone vs. polygon: Cone is standard (classic auxiliary shaft). Polygon is for EGIG/Fabbri polygon auxiliary shafts. This is a tough compatibility issue - only fits if your auxiliary shaft fits.

STD vs. PRO: STD uses organic (cork) pads - classic, robust, suitable for everyday use. PRO uses carbon pads - longer durability, more reserve and potentially less release travel, plus approx. +10% contact pressure with the same springs.

2.0 basic design: All versions are based on 2.0 - more space to the basket and more space for the pad package, which significantly reduces mounting problems (sitting up).

Lever tip: Levers with a small knob usually offer more release travel. This helps with clean separation with little preload.

Repkit note: If you are using a repair kit: only use the version bolted from the rear - otherwise the bolt heads may stick to the inner basket.