Clutch friction plate set -BGM PRO Superstrong Racing Red- Lambretta LI, LIS, SX, TV (series 2-3), DL, GP - 6 plates

Manufactured exactly according to our specifications, we have managed to use a very high quality organic coating mixture which is pressure and temperature stable, but at the same time low-wear. All this combined with a very good grip to always have the full torque on the rear wheel. Even with a very high spring force, the separation distance is short, because the material is not as soft and compressible as that of other manufacturers. Our BGM pro Lambretta pads can be used in all engines, from standard to fully exhausted engine setup. Our BGM pro red pads are equipped with a reinforced, very high quality pad compound, similar to the Surflex Red. This is especially suitable for clutches that are subject to very high loads such as in racing and/or in connection with a very high engine performance.

4 discs BGM8004
CONTAINS: 4x friction lining BGM Pro (each lining 3,50mm)
RESULT: 4-plate clutch in connection with series clutch parts (3x 1,50mm clutch steel plate like series)

5 discs BGM8005:
CONTAINS: 5x friction lining BGM Pro (each lining 3,50mm)
RESULTS: 5-plate clutch in connection with higher pinion, spider and base plate (4x 1,50mm clutch steel plate)

6 plates BGM8006 (red):
CONTAINS: 6x friction lining BGM Pro red (2.60mm lining each)
RESULTED: 5-plate clutch in conjunction with series clutch parts (4x 1.50mm clutch steel plate)
OR
RESULTED: 6-plate clutch in conjunction with higher pinion, spider and base plate (5x 1.50mm clutch steel plate)

TIP:
The transmittable torque of a clutch increases with the number of friction plates available. Therefore the red BGMs with their 2,6mm thickness offer a very nice solution to realize a solid 5 disc clutch on the basis of the standard clutch parts.

A durable 6 disc clutch can only be realized with a higher basket, spider and pressure plate. We advise against the attempt to obtain a 6-disc clutch by means of very thin steel discs and linings for reasons of durability.

_{AI-translation}