Control unit injection system -MALOSSI- Forcemaster 2.1 - electronic controller - Italjet Dragster 300 ie 4T LC Euro 5 2024 - (AZCR)

With its completely new design, the Force Master 2.1 control unit is much easier to configure.
Developing ergonomic and user-friendly products has always been a Malossi goal:
Force Master 2.1 is a modern, powerful and extremely efficient product.
With an interface for the K and CAN communication lines, a new user interface and an additional capacitive ignition input, Force Master 2.1 is the ideal complement for vehicle performance management:
Without functional limitations, it allows the engine to be pushed beyond the limit of the original rev limiter.

Technical details:

- Mixture adjustment
- ± 14 % at min/medium/max
- Speed limiter: + 500 rpm
- Temperature range = -30 °C to +80 °C
- Minimum operating voltage = +7 V
- Maximum operating voltage = +16 V
- Average current consumption < 200 mA
- Protection class = IP65

4 different maps:

- Map 0: Original or Malossi with DB-killer exhaust system, Malossi cylinder, original cylinder head, original camshaft, original filter
- Map 1: Original exhaust system, Malossi cylinder, original cylinder head, Malossi camshaft, original filter
- Map 2: Malossi with DB-killer exhaust system, Malossi cylinder, original cylinder head, Malossi camshaft, original filter
- Map 3: Malossi without DB-killer exhaust system, Malossi cylinder, original cylinder head, Malossi camshaft, Malossi filter

Complete control of the mixture preparation is achieved by combining the O2 controller with the Force Master control unit.
The synergy of these two devices knows no bounds:
The entire specified level is managed, controlled and optimized for each processing step proposed by Malossi.

Installation exclusively with the Malossi cylinder kit M3118686