back

Show all articles from: Crankshaft

Tameni Item number: 8070002

Crankshaft Race -MEC EUR by TAMENI 58mm stroke, 107mm connecting rod- Lambretta DL/GP

4 Ratings

235,00 €*

available immediately

Shipping weight 2,4 kg

Information on product safety

This is the entry into the world of Lambretta racing shafts.

The shaft is based on very good, Italian crank webs and an equally good connecting rod.

The shaft is assembled with European quality bearings and so this shaft can become a faithful companion even in high revving engines.
_{AI-translation}

This is how we ensure, that reviews come from real consumers.

Anonym 12/27/2014

ein Kracher, sauber verarbeitet,bin sehr zufrieden

Anonym 12/27/2015

alles gut

Anonym 03/20/2016

very good product have used these on engines up to 20HP with no problem .

Anonym 04/27/2016

superb!

Rate this product now

Ball bearing

Dimensions

16x20x20mm

Piston pin

Diameter

16 mm

Crankshafts

Stroke

58 mm

Thread on alternator side

M12x1,0 Linksgewinde

Thread on drive side

M8x1,0 Rechtsgewinde

Crank web diameter

95.9 mm

Crankcase must be spindled

nein

Motor housing must be modified

nein

Rotary vane crankshaft

nein

Full cheek crankshaft

nein

Diameter of variator stub

17.9 mm

Variomatic stub design

verzahnt

Wide crank webs

40.5 mm

Bearing seat diameter on alternator side

25 mm

Bearing seat diameter on drive side

25 mm

Diameter of sealing ring seat on alternator side

33 mm

Diameter of sealing ring seat on drive side

33 mm

Connecting rod

Connecting rod length

107 mm

Connecting rod strength

5.5 mm

Connecting rod eye top diameter

20 mm

Lifting pin diameter

22 mm

Upper connecting rod eye lubrication hole

ja

Lower connecting rod eye lubrication hole

Schlitz

Connecting rod thrust washers

ja

OEM numbers (for comparison purposes only)

Scooter Center:

8070002

Matching

Accessories

Syringe -B.BRAUN Injekt® Solo- PE - 20ml

B.Braun
3331021

Syringe -B.BRAUN Injekt® Solo- PE - 20ml

L-shaped spacer maghousing -LAMBRETTA- LI (series 2-3), LIS, SX, TV (series 2-3), DL, GP

Casa Lambretta
8002100

L-shaped spacer maghousing -LAMBRETTA- LI (series 2-3), LIS, SX, TV (series 2-3), DL, GP

Roller bearing -NU2205 ECP- (25x52x18mm) - (used for crankshaft flywheel side Lambretta GP, DL)

Roller bearing -NU2205 ECP- (25x52x18mm) - (used for crankshaft flywheel side Lambretta GP, DL)

Gasket crankcase/maghouse -OEM QUALITY- Lambretta LI. LIS, SX, TV (series 2-3), DL/GP

OEM-Qualität
8005020

Gasket crankcase/maghouse -OEM QUALITY- Lambretta LI. LIS, SX, TV (series 2-3), DL/GP

Oil seal set engine -LAMBRETTA- LI 125-150 (series 2-3), LIS, SX, TV (series 2-3), GP/DL

Oil seal set engine -LAMBRETTA- LI 125-150 (series 2-3), LIS, SX, TV (series 2-3), GP/DL

Work gloves - mechanics gloves - protective gloves -BGM PRO-tection- seamless knitted gloves, 100% nylon with polyurethan coating - size L (9)

BGM PRO
BGM0400L

Work gloves - mechanics gloves - protective gloves -BGM PRO-tection- seamless knitted gloves, 100% nylon with polyurethan coating - size L (9)

Oil seal set engine -BGM PRO, FKM/Viton® (E10/etahnol resistant)- Lambretta LI 125-150 (Serie 2-3), LIS, SX, TV (Serie 2-3), GP/DL

BGM PRO
BGM1141

Oil seal set engine -BGM PRO, FKM/Viton® (E10/etahnol resistant)- Lambretta LI 125-150 (Serie 2-3), LIS, SX, TV (Serie 2-3), GP/DL

Bearing dummy for crankshaft -BGM PRO- 6305 (62x25x17mm) - used for crankshaft, drive side, Lambretta LI (series 2-3), LIS, SX, TV (series 2-3)

BGM PRO
BGM1204TL

Bearing dummy for crankshaft -BGM PRO- 6305 (62x25x17mm) - used for crankshaft, drive side, Lambretta LI (series 2-3), LIS, SX, TV (series 2-3)

Bearing dummy for crankshaft -BGM PRO- NU2205 (25x52x18mm) - used for crankshaft, flywheel side, Lambretta LI (series 2-3), LIS, SX, TV (series 2-3)

BGM PRO
BGM1206TL

Bearing dummy for crankshaft -BGM PRO- NU2205 (25x52x18mm) - used for crankshaft, flywheel side, Lambretta LI (series 2-3), LIS, SX, TV (series 2-3)

Delivery date

Ignition Timing Strobe Light Lamp -TRISCO (Prolite, Double-D) (D-Cell type)- Inductive Pick Up 6V / 12 Volt - Xenon Timing Light

Ignition Timing Strobe Light Lamp -TRISCO (Prolite, Double-D) (D-Cell type)- Inductive Pick Up 6V / 12 Volt - Xenon Timing Light

Matching

Customers also bought

Grommet engine/wire -PIAGGIO- Vespa V50, V90, PV, ET3, VNA1T-2T, VNB1T-5T (used as grommet for engine casing/stator plate)

Piaggio
1046766P

Grommet engine/wire -PIAGGIO- Vespa V50, V90, PV, ET3, VNA1T-2T, VNB1T-5T (used as grommet for engine casing/stator plate)

Crankshaft -MAZZUCCHELLI Racing (rotary valve)- Vespa PX125, PX150

Mazzucchelli
1620003

Crankshaft -MAZZUCCHELLI Racing (rotary valve)- Vespa PX125, PX150

Delivery date

Exhaust -OEM QUALITY- Vespa V50, 50N, 50S, 50L, 50R, 50 Special, V50 Elestart, PV125

OEM-Qualität
2020016

Exhaust -OEM QUALITY- Vespa V50, 50N, 50S, 50L, 50R, 50 Special, V50 Elestart, PV125

Seat -NISA Sport 20- Vespa PX (-1983), Sprint, GT, GTR, Super, TS, GL, VNA, VBA, VNB, VBB, T4 - with flat fuel tank also fits Rally 180/200, GS160, SS180 - black

Seat -NISA Sport 20- Vespa PX (-1983), Sprint, GT, GTR, Super, TS, GL, VNA, VBA, VNB, VBB, T4 - with flat fuel tank also fits Rally 180/200, GS160, SS180 - black

Delivery date

Speedometer worm -OEM QUALITY- Vespa 9 teeth, l=44mm, 2.7mm square (used in Rally180 (VSD1T), Rally200 (VSE1T), Sprint150 (VLB1T), GT125 (VNL2T), GTR125 (VNL2T), TS125 (VNL3T), GL150 (VLA1T)VLA1T (from 077399))

OEM-Qualität
4950017

Speedometer worm -OEM QUALITY- Vespa 9 teeth, l=44mm, 2.7mm square (used in Rally180 (VSD1T), Rally200 (VSE1T), Sprint150 (VLB1T), GT125 (VNL2T), GTR125 (VNL2T), TS125 (VNL3T), GL150 (VLA1T)VLA1T (from 077399))

Carburettor gasket set -DELLORTO- SI 18-20-24 Vespa PX80, PX125, PX150, PX200, Sprint, Rally

Dellorto
5350007

Carburettor gasket set -DELLORTO- SI 18-20-24 Vespa PX80, PX125, PX150, PX200, Sprint, Rally

Float -DELLORTO- SI

Dellorto
5350008

Float -DELLORTO- SI

Float needle -DELLORTO, quadrilateral, 4.5mm- SI (Vespa PX), SH (Lambretta LI series 3, LIS, SX, TV, DL, GP), PHBH, PHBL - not spring loaded

Dellorto
5350009

Float needle -DELLORTO, quadrilateral, 4.5mm- SI (Vespa PX), SH (Lambretta LI series 3, LIS, SX, TV, DL, GP), PHBH, PHBL - not spring loaded

Carburettor casing/carburettor gasket -OEM QUALITY- Vespa PX80, PX125, PX150, Sprint, Cosa 125

OEM-Qualität
5350066

Carburettor casing/carburettor gasket -OEM QUALITY- Vespa PX80, PX125, PX150, Sprint, Cosa 125

Gasket crankcase/maghouse -MB DEVELOPMENTS- Lambretta LI, LIS, SX, TV (series 2-3), DL/GP - 0.5mm

MB-Developments

MB-Developments
7671212

Gasket crankcase/maghouse -MB DEVELOPMENTS- Lambretta LI, LIS, SX, TV (series 2-3), DL/GP - 0.5mm

Gasket crankcase/maghouse -MB DEVELOPMENTS- Lambretta LI, LIS, SX, TV (series 2-3), DL/GP - 1.0mm

MB-Developments

MB-Developments
7671213

Gasket crankcase/maghouse -MB DEVELOPMENTS- Lambretta LI, LIS, SX, TV (series 2-3), DL/GP - 1.0mm

Gasket crankcase/maghouse -MB DEVELOPMENTS- Lambretta LI, LIS, SX, TV (series 2-3), DL/GP - 1.5mm

MB-Developments

MB-Developments
7671214

Gasket crankcase/maghouse -MB DEVELOPMENTS- Lambretta LI, LIS, SX, TV (series 2-3), DL/GP - 1.5mm

Crankshaft Race -MEC EUR by TAMENI 58mm stroke, 107mm connecting rod- Lambretta DL/GP

Crankshaft Race -MEC EUR by TAMENI 58mm stroke, 107mm connecting rod- Lambretta DL/GP

Crankshaft Race -MEC EUR by TAMENI 58mm stroke, 107mm connecting rod- Lambretta DL/GP

Crankshaft Race -MEC EUR by TAMENI 58mm stroke, 107mm connecting rod- Lambretta DL/GP