Engine repair kit -OEM QUALITY- Vespa PX125, PX150 (1982-1984)

Complete kit for the big engine revision.
We have taken great care to use only original PIAGGIO spare parts as far as possible. Where these are no longer available, we have used parts that are of OEM quality.
The set consists of

3720004 Needle bearing -B188- (29x35x12mm)

3820051 Seal kit motor -VESPA- PX 80-150 + O-Rings

3720006 Ball bearing -6204 2RSH- (20x47x14mm)

3720007 Ball bearing -6302- (15x42x13mm)*

3720009 Bearing needle set 2,0x11,8mm

3820010 Oil seal set -VESPA- PX 80-200

3720002 Needle bearing -NBI 253815- (25x38x15mm)

3720001 Ball bearing -613912- (25x62x12mm) 8 balls

3620004 Gear oil -RUNGE- Vespa SAE 30 - 250ml

1320016 Clutch facings -VESPA type 6-spring- 3-discs

9020085 castle nut

9020084 castle nut cage

4940009 shifting cross -VESPA- PX old 125ccm (VNX2T up to no. 232052), 150ccm (VLX1T to no. 624301), 200ccm (VSX1T to no. 315266)

*Some engines (usually still with contact ignition) still have the transmission type of the Sprint Veloce models. They use a different bearing on the reduction gear. They also use a different type of auxiliary shaft and different auxiliary shaft needles. Since the auxiliary shaft axle in the bearing area of the needles is often worn out (pitting), it should be replaced by a new one. The needles supplied in the set above will fit into this new one. The original Sprint auxiliary shaft axle uses pointed needles which can only be used in the old auxiliary shaft axles. Therefore in case of doubt always order these parts in addition to the kit:

3720026 Ball bearing (12x40x12mm)

0208700 Auxiliary shaft axle Sprint

_{AI-translation}