Exhaust -OEM QUALITY- Vespa PV125

Exhaust -Replica- Vespa PV125.
The replica exhaust is characterized by a very thick plate thickness, which is at least on the original manufacturer's level. The exhaust system is excellently processed. In short, you will find here an exhaust that combines good fit and durability.
Even years old exhaust systems are often so coked from the inside with deposits that the driving values suffer significantly. In the worst case this can lead to overheating of the engine.

NOTE:

As with the original Piaggio exhaust systems, the same mufflers are used for both the 50cc and 125cc models.
The difference in size both in height and circumference of the cylinders is compensated here by slotted holes. It may be necessary to bend the mounting bracket to fit the installation conditions.

The exhaust fits best out of the box on the 50ccm models. Please make sure that the exhaust is not under tension after mounting. This means that the exhaust must not be pulled into position with the mounting screws. If this would be necessary, it must be adjusted before the final assembly.

_{AI-translation}