Liquid gasket -LOCTITE omniVISC® 1050- 90g

OmniVISC® 1050 Is a versatile, elastic silicone rubber adhesive. It is ready for use and cures at room temperature by contact with the film of moisture present on all surfaces and with atmospheric humidity.

It is particularly suitable for bonding and sealing materials with different thermal expansion, e.g. metals, glass, ceramics, wood, fabric, leather, elastomers and thermosets to and among each other. OmniVISC® 1050 starts to cure after approx. 15 min (recognizable by a skin formation). The curing progresses more or less quickly depending on the size of the surface exposed to humidity. Depending on the application, a complete curing time of 24 h to several days must be expected.

After complete curing, the material has good chemical resistance, e.g. against water, weak acids and alkalis, fuels and lubricants, inert and fuel gases, oxygen, hydraulic fluids, etc. It has a wide temperature application range from -70 °C to +200 °C under continuous load. It retains its elasticity in this range. It is suitable both for narrow adhesive and sealing gaps and for filling large joints and gaps. The silicone rubber adhesive has anti-adhesive properties. Therefore, neither lacquers and paints nor other media adhere to cured omniVISC surfaces.

It is characterized by its very good electrical insulating properties. Together with its resistance to abrasion, moisture, weathering and chemicals, it is suitable as a protective coating. OmniVISC® 1050 is colorlessly transparent and has good wetting and adhesive properties due to its soft-flowing properties.

omniVISC® 1050

offers a range of rational solutions for all

manufacturing and repair problems, e.g.:

• seals formed on site instead of a myriad of different finished seals made of paper, cork, rubber, etc. especially in vehicle construction
• for bonding and sealing glass with metals and plastics in vehicle construction, architecture and apparatus engineering
• for sealing or securing threads when easy solubility is required, i.e. when even low-strength anaerobic adhesives (e.g. omniFIT 50 M) are still too strong
• for fixing aluminium type and company signs on rough surfaces of other materials instead of previous screws or rivets
• for bonding fabrics of all kinds with plastics and metals in the automotive and appliance industry
• for bonding thermosetting plastics in relay and switch construction with metal parts especially for temperature loads
• for filling and sealing joints at bushings of cables, pipes, devices, switches, lighting fixtures, especially in explosion-proof rooms
• for abrasion-resistant and anti-adhesive lining of containers, Bunkers and silos in chemical apparatus engineering
• for sealing all kinds of viewing windows in instrument front panels, heating furnaces, gas appliances, water meters and caravans

TIP: Excellent for use as an exhaust sealant or for the cylinder head!