Fork -OEM QUALITY- Vespa P-range (-1982) - 16mm axle

Fork - steering tube - steering tube -OEM QUALITY- Vespa PX old
The steering tube is manufactured by the former OEM Piaggio manufacturer Prediere & Abbate. It corresponds optically
as well as technically 1:1 to the original component. The fork is ready to install with already pressed aluminum swingarm
including Ø16mm wheel axle. Of course, the aftermarket disc brakes for the Ø16mm axle type will also fit.
For the installation of the steering tube we recommend the use of a new steering head bearing set. You will find the corresponding
special tool for de/assembly under accessories.

UPGRADE YEARS 1977-1982
The Lusso fork has a thicker tube than the fork of the Vespa PX old (1977-1982). The fork is therefore more stable
and ideal especially when converting to disc brakes. Therefore, the forks of the Lussomodelle also like
used to upgrade the older PX models. However, the fork of the models from 1984 already has a
different steering lock type. The fork would have to be heavily modified for use in an old PX therefore
(steering lock milling to weld and mill a new slot).
Easier is the use of the series 'hermaphrodite fork' called steering tube type of the years 1982-1984. These have
also already the thick steering tube and a 20mm axle, but still the old steering lock type (slot). This
fork type can be easily installed like a stock fork but already combined with a modern Ø20mm brake.

(TW040123)