Headlight -MOTO NOSTRA- LED HighPower - Ø=120mm - 12V DC - with E9 marking - for conversion of e.g. Lambretta LI/TV (series 1-3), Jet, Vespa SS50, SS90, PV125, ET3, Super, VNB, VBA, VBB, GS150 / GS3, GS160 / GS4 (VSB1T)

MOTO NOSTRA LED headlight Ø120 mm for Vespa and Lambretta

LED headlight with E9 marking (road approval) and powerful high/dipped beam. An additional feature is a separately switchable position light. With a diameter of 120 mm, it fits perfectly in the steering head of the PX and Cosa models as well as in the lamp trim ring of e.g. Lambretta LI/TV (series 1-3), Jet, Vespa SS50, SS90, PV125, ET3, Super, VNB, VBA, VBB, GS150 / GS3, GS160 / GS4 (VSB1T), VGLA, VGLB

ADVANTAGE LED
The limit with conventional Bilux bulbs is a 45/45 W headlight bulb on most scooters. The ignitions, which generally have an output of 80 W to max. 120 W, do not provide any more. The luminosity measured in lumens is less than 400.

The LED headlight has more than three times the luminosity (1200 lumens). The power consumption is only 20 W. This corresponds to the luminous efficacy of a conventional 100 watt headlamp. This means that considerably better illumination can be achieved with a given alternator/voltage supply. In addition, more capacity remains for other consumers.

• Voltage: 12 Volt DC (direct current)

Cable colors:

• Black = earth
• White = low beam
• Red = High beam
• Green = position light (ring)

NOTE
The LED headlight works exclusively with direct current; it therefore requires a battery or another equivalent power source with 12V DC. Operation on an alternating current power source will result in immediate failure. The headlight does not have any vehicle-specific brackets.