Number plate holder -PIAGGIO- Vespa GT 250 (ZAPM45102), Vespa GT L 125 (ZAPM31100, ZAPM31101), Vespa GT L 200 (ZAPM31200), Vespa GTS 125 (ZAPM31300), Vespa GTS 250 (ZAPM45100, ZAPM45101), Vespa GTS 300 (ZAPM45200, ZAPM45202), Vespa GTS Super 125 (ZAPM4530

Nut with serrated flange, M6 x 1.0 -PIAGGIO-

Nut with serrated flange -DIN 6923- M6 x 1.0 (used for cylinder head Piaggio 50cc 2-stroke, Minarelli 50cc (vertical cylinder), Morini 50cc (type AH))

cylinder head nut set -NARAKU- 4 pcs - M6 thread

Plate -PIAGGIO- Ø=3.5mm - 11x16mm (used for cylinder cwoling / flywheel cover Vespa PX)

Sheet metal nut -PIAGGIO- Ø=4,8mm 12x15mm used for cylinder cover Vespa V50, PV125, ET3, PK S, PK XL

Tapping screw 4.2 x 13mm -PIAGGIO- stump type

Screw -DIN 7985- M4 x 12mm (used to attach clamping plate electrochoke, indicators and blinker lenses Vespa PK XL2)

Screw for automatik choke clip -DELLORTO- PHVA, PHBN

Tapping screw -DIN 7981- 3.5 x 16mm

Tapping screw -DIN 7981- 3,5x16mm - stainless steel (used for indicator glasses Vespa P-range rear)

Washer bodywork -DIN 9021- M4 - zinc plated

Washer bodywork- M4x15 - zinc plated

Washer bodywork -DIN 9021- M4 - stainless steel

Washer -DIN 125- M6

Washer -DIN 125- M6 - stainless steel

Rear brake cable clamp set -BGM ORIGINAL- Lambretta D (1953-), LD (1953-), E, F, LI, LIS, SX, TV, DL, GP - 10 pcs

Washer M6 DIN 433 similar - smaller outer diameter for fixing air intake cover -LAMBRETTA- LI, LIS, SX, TV, DL, GP, engine housing Lambretta A, B, C, LC, D, LD

Washer -DIN 125- M4

Washer bodywork -DIN 9021- M6 - stainless steel

Washer bodywork -PIAGGIO- 6,4 x 18 x 1,6mm (verwendet für z.B. Sitzbankriemen Vespa PX Lusso, MY, 2011)

Washer - ISO 7094- M6

Nut -DIN 934- M4 (used for fixing indicators Vespa PX)

Self-locking nut -DIN 985- M4

Spring washer -DIN 127- M4

Serrated lock washer -DIN 6798- M10

Spring washer, waved -DIN 137 steel, glavanised- M10 (used for clutch nut Vespa V50, PV125, ET3, PK S, PK XL)