Mirror bracket -RMS- Vespa PX, Vespa PK

hole for mirror Ø= 10mm, hole for mounting holes (Ø=9mm) on the handlebars l= 45mm

Fixing screws in M8x15mm are included with the holder. For mounting on Rally/Sprint and similar models please use longer screws (M8 x 25mm) (see accessories).

NOTE:
According to StVZO §56 in Germany every motor vehicle, which also includes mopeds, requires at least one mirror mounted on the left side of the vehicle.

NUMBER

The number of mirrors depends on the initial registration (EZ):

• EZ before 01.01.1990 1 mirror left
• EZ from 01.01.1990 to 100 km/h 1 mirror left
• EZ from 01.01.1990 over 100 km/h 2 mirrors

SIZE

The size of the reflecting surface must be

• before EZ 17.06.2003 at least 60cm² (for round mirrors the diameter is greater-even 88 mm)
• according to EZ 17.6.2003 at least 69cm² (for round mirrors the diameter is greater or equal 94 mm)

...will be.

CHECK MAR K:

Mirrors with a check mark automatically meet all the above conditions.

• On vehicles approved according to EC law (from 01.10.2005) mirrors with approval marks must be fitted.
• Vehicles with ABE approval (before 01.10.2005) must only use mirrors that meet the above criteria.

_{AI-translation}