Mounting tool for crankshaft -BGM PRO- Vespa PX, Cosa, T5 125ccm, Rally, GS160, SS180

Tool for crankshaft assembly Vespa Largeframe -BGM PRO- Made in Germany
Mount the crankshaft quickly and easily like a professional. This is possible with the quality tool from BGM PRO.
With this set, the crankshaft can be professionally and gently pulled into its press fit in the bearing of the engine housing.

• Push the crankshaft as far as possible into the bearing seat (by hand)
• Slide the cylindrical sleeve of the set over the stub protruding from the bearing on the clutch side
• Turn the threaded sleeve of the set onto the thread of the clutch-side crankshaft stub
• To increase the force, insert the enclosed toggle into the threaded sleeve
• While retracting the crankshaft, center it slightly in the seat with your hand
• To fully retract the crankshaft, it may be necessary to place the original clutch washer (with groove) under the bushing and repeat the process.

Made to our specifications by a German company. As soon as you hold it in your hand you notice the high quality. Real heavy workshop quality, made of a tempered tool steel

.

• Surface: blue galvanized
• Scope of delivery: sleeve, threaded sleeve, toggle

Suitable for: all Vespa Largeframe models with internal crankshaft seal: Vespa PX, Cosa, T5, Rally, GS160, SS180

(US)

_{AI-translation}