Needle set for clutch sprocket -NTN- Vespa VNA1T, VNA2T (-081468), GS150 / GS3 VS1T, VS2T, VS3T, VS4T, VS5T, GS160 / GS4 (VSB1T) VSB1T, SS180 (VSC1T) - 40 needles

Air corrector jet -DELLORTO (type: 5827) SI- (160)

Jet -DELLORTO (type: 4576) SI- (116)

Spark Plug -NGK BR ES- BR8ES

Breather plug clutch cover -PIAGGIO- Vespa all Vespa models

Ball bearing -6304- (20x52x15mm)- (used for drive shaft Vespa GS160 / GS4 (VSB1T), SS180 (VSC1T)

Ball bearing Bearing Kulu -613912 C3- (25x62x12mm) 9 balls - (used for crankshaft drive side Vespa PX, T5 125cc, Rally180 (VSD1T), Rally200 (VSE1T), Sprint, GS150 / GS3... - Crankshaft alternator side Sprint, GS150 / GS3, VNA, VNB, VBA, VBB...)

Universal inner cable -Ø=1,9mm x 2000mm, fitting Ø=8,0mm x 8mm- used as clutch cable, front brake cable - laid cable

Locking plate -VESPA 1-wing- PX, T5 125cc, Cosa, Rally180 (VSD1T), Rally200 (VSE1T)

Splint -ISO 1234- Ø=3,5 x 32mm (used for front wheel axle Vespa PK, PX, Cosa, T5 125ccm - rear wheel axle Vespa PK, PX, Cosa, T5 125ccm, Rally, Sprint, TS, GT, GTR, Super, V50, PV125, ET3, all Piaggio/Gilera 50cc Automatic)

Gear selector box gasket -PIAGGIO- Vespa Largeframe, PX, Cosa, T5 125cc, Rally, Sprint, GT, GTR, Super, GL, VNA, VNB, VBA, VBB, GS160, SS180

O-ring 57.0x2.0mm rear hub dust cover/engine -VESPA- PX, Vespa Rally180 (VSD1T), Vespa Rally200 (VSE1T), Sprint150 (VLB1T), TS125 (VNL3T), GT125 (VNL2T), GTR125 (VNL2T)

O-ring set rear hub dust cover/engine -PIAGGIO 22.0x2.5mm- Vespa PX, T5 125cc, Rally, Sprint, TS125, GT125, GTR125, Super