Oil seal set for crankshaft -MALOSSI PTFE/FKM- Vespa PX (since 1984), T5 125cc, Cosa

Malossi uses the best materials for its shaft seals. They consist of steel cores covered with fluorinated rubber (FKM/FPM). The inner running surface, which has direct contact with the sealing surface of the crankshaft, is made of PTFE (polytetrafluoroethylene). Both materials are known under the trade names FKM and Teflon of the manufacturer DuPont. PTFE is extremely resistant to all acids, oils, greases, alcohols and fuels. Due to the increased alcohol content in today's fuel, shaft sealing rings with this material are recommended. In addition to their enormous wear resistance, they run with low friction, which makes them a must for all engines with higher speeds. Piaggio uses PTFE rings as standard in 125-180cc two-stroke engines such as the Runner or SKR. Also in the PX engines, the clutch side large shaft seal of the crankshaft is made of such a material (brown sealing lip).

• Very low wear
• Absolutely heat resistant
• Extremely low frictional resistance
• Resistant to almost all chemicals
• Perfectly suitable for heavily tuned engines
• Also applicable in series engines

sizes:

crankshaft coupling side: 31x62,1x5,8/4,3mm

crankshaft alternator side: 24x35x6mm

_{AI-translation}