PIAGGIO Rear Brake Arm for Vespa ET2/ET4, LX/LXV, S, Primavera, Sprint, Piaggio Zip, NRG, TPH, Liberty, Fly, Gilera Runner

Piaggio Rear Brake Arm – for Drum Brake Vespa, Piaggio, Aprilia, Derbi and Gilera

Genuine Piaggio brake arm for the mechanically operated rear drum brake of numerous Vespa, Piaggio, Aprilia, Derbi and Gilera models. The brake arm is mounted on the operating shaft of the rear brake and transfers the movement of the brake cable to the brake mechanism inside the brake drum.

The rear brake cable is connected to the brake arm using a barrel-shaped adapter. When the rear brake is operated, the brake cable pulls on the lever arm, thereby rotating the operating shaft of the drum brake.

Splined mount for the brake shaft

The brake arm features a splined mount for a positive connection to the operating shaft of the drum brake. The slotted section of the mount allows the brake arm to be clamped onto the shaft. A lateral threaded mount is provided for the corresponding clamping connection.

At the opposite end is the fork-shaped mount for connecting the rear brake cable. The product images show two overlapping tabs with large holes in this area. The brake cable is connected to the brake arm here using a barrel-shaped adapter.

• Genuine Piaggio brake arm for the rear drum brake
• For mechanical operation via the rear brake cable
• Splined mount for connection to the brake shaft
• Slotted clamping section with lateral threaded mount
• Fork-shaped mount for the brake cable with barrel-shaped adapter
• Piaggio original part numbers: 833428, 560796, AP8540141, AP8113788

Suitable for Vespa

• Vespa ET2 50 (1997–2002)
• Vespa ET4 50–125 (1996–2005)
• Vespa LX 50 (2004–2013)
• Vespa LXV 50 (2006–2009)
• Vespa S 50 (2007–2012)
• Vespa Primavera 50 (2013–2017)
• Vespa Sprint 50 (2014–2017)
• Vespa PX 150 (1999–2005)

Piaggio Models

• Piaggio Fly 50 (2004–2015)
• Piaggio Fly 100 (2006–2014)
• Piaggio Liberty 50 (1997–2017)
• Piaggio Liberty 125–150 (1998–2002)
• Piaggio NRG 50 (1996–2014)
• Piaggio TPH 50 (1999–2020)
• Piaggio TPH 125 (1995–2003)
• Piaggio Zip / Zip RST / Zip II 50 (1996–2016)
• Piaggio Zip II 100 (2006)
• Piaggio Skipper 125–150 (1998–2005)
• Piaggio Hexagon 125–180 (1998–2000)
• Piaggio Diesis 50 (2001–2006)

Other Models

• Aprilia Mojito 50 Custom (2004–2010)
• Aprilia Scarabeo 50–100 (2001–2018)
• Aprilia Sport City One 50 (2008–2011)
• Aprilia SR Motard 50 (2012–2018)
• Derbi Atlantis 50–100 (2002–2010)
• Derbi Boulevard 50–100 (2009–2014)
• Derbi Sonar / Variant Sport 50
• Gilera Ice 50
• Gilera Runner 50–180
• Gilera Stalker 50
• Gilera Storm 50

Installation note

The brake arm is part of the mechanical brake actuation system and is therefore a safety-relevant component. During installation, the correct seating on the splines of the brake shaft, the clamping connection and the attachment of the brake cable must be checked.

After installation, the brake cable play and the function of the rear drum brake must be adjusted and checked according to the vehicle specifications.